Yes, same problem, ATA won't register. Also, noticed the VOIPO website was exceptionally slow.
Type: Posts; User: voipinit
Yes, same problem, ATA won't register. Also, noticed the VOIPO website was exceptionally slow.
I assume your phone does not ring, if so blocking the number even if you could would be ineffective. Since the phone never rings NOMOROBO is similarly not effective. Spammers have a new "technique"...
My VOIP service has been rock solid for years. But now I am experiencing severe static on the line to the point of being unusable. It started about a month ago and just wondering what it could be. ...
Mine is:
Older device (hence the Extra and CPE entries) and have not updated it in awhile. It works with no issues.
Ver 1.1B Program -- 1.0.10.9 Bootloader -- 1.0.0.9 Core -- 1.0.10.6 ...
Yesterday, my phone (primarily line 2 which is the same number as line 1), started ringing almost non-stop every few minutes. I am a BYOD'er with a Grandstream and it was a quite easy fix. If you...
Unless you have your device in an over 80 degree plus room and it is an enclosed space are about the only way your device can overheat. The 502's run hot normally. Mine is very warm to hot to the...
I am not blaming the router, I am just pointing out I have no ports forwarded and my ATA is not sitting behind a DMZ and I have no problems. There is obviously a difference between your router ...
I don't have any ports specified on my ATA as open nor have it setup as a DMZ. The only thing I have is the ATA has a static IP. I think it's more of the peculiarities of the router you have and...
Just curious, how many customers do you have and how long have you been with VOIPo? I noticed your forum join date was this month.
I have been with VOIPo since 01/2009 and aside for a couple...
Just FYI, it will only enter the selected number in call routes once, so if you add it multiple times it will only appear once. Also, if you enter it more than once and it has a different option, it...
You can try in the call routes tab entering ********** (10 asterisks) for incoming routes (select blacklist) and the same with outgoing routes (select block). I am not sure it will block 911 (or any...
One thing you might want to try is putting your ATA ahead of the router for testing purposes. If the breaking up goes away, then it is something in your router. I am not familiar with the OBI110...
It sounds like he is BYOD in which case he may not want to provision it.
In my area a cable technician will not touch a customers phone line unless they subscribe to phone service from the cable company. You may want to check.
The problem is connecting to house wiring has to be done properly. I have had VOIP devices connected to my house wiring since 2002 with not one failure from electrical surge. I have had the HT-502...
It shouldn't be your router if the ATA is in front of it like you say. The only pieces in play here should be your modem and ATA since your ATA is providing internet to your router from the LAN...
VOIPo can change your service to a codec that uses less bandwidth. I would submit a ticket and ask.
^ same here, all is well.
I believe VOIPo call routes block by alphanumeric characters in the CID field, therefore if you make a rule with "unavailable", it will not be blocked as it is in the CNAM field and not the CID. ...
^ x2
I became a Voip subscriber in 2000 and have used Vonage, SunRocket (now defunct), Packet8 and Viatalk. I have been with VOIPo since 01/2009 and will be staying with VOIPo. The service has...
Thanks, I'll try adding the inbound call route of "unavialable". The call log showed the call from "asterisk" so I already added that. Yeah, it appears the VOIPo block is strictly looking at the...
Block all unknown calls has a filter list (private, restricted and a few others). The particular call I'm referencing had a CID of "unavailable" and a number of "out of area" and rang thru with the...
VOIPo,
If possible, could you add "unavailable" and/or "out of area" to the "block all unknown calls" CID filter?
Thanks in advance.
I have the HT-502 behind my router and connected to the WAN port of the ATA only. I do not have a problem logging into the device with the statically assigned IP (if inside my firewall), or outside...
^ True, if your address (location) with VOIP service is not accurate, your access to 911 is extremely limited. With VOIPo this is easy to avoid, make sure your 911 service address is accurate in...