@Green - Not yet, I have been gone for 2.5 weeks at shows/fairs/events slinging VoIP service... I need to get the mail to get my HT704.
@Tim - I dont think HT704 uses same Firmware, unless you are...
Type: Posts; User: OregonVoIP
@Green - Not yet, I have been gone for 2.5 weeks at shows/fairs/events slinging VoIP service... I need to get the mail to get my HT704.
@Tim - I dont think HT704 uses same Firmware, unless you are...
Just remember with wireless systems like clear you get signal bounce, just because it says 4 bars (or 5) doesnt mean at that moments its real. Signal bounce can cause many issues, ive seen signal...
Really I should be clear I use a Clear Device to test a device registers before handing it to a customer, and i do make a test call from each device. Just easier than plugging and unplugging into my...
i am about to up channel usage with support on a contract coming in, and will be using a 704, ill let you know what i have to do. since accounts are limited to 2 lines, guessing it will be 4...
i test with clear, it works fairly well... sometimes spotty depending on other broadband usage.
Jeff G.
phoneplicity.com
with the phase out if you want HT502s better get on the ball... My wholesaler only has 125 (or less now) and counting with no ability to get more.
it really varies bro.
You will always get a good look when having to collect the bill.
I have one customer that uses 3-12 minutes a month... and some customers that work from home that use...
I have the ability to get any Grandstream, Linsys, etc etc company at wholesale + shipping from here in the States. And I have gone solely with HT702 really for the fact the HT502 is being phased...
are all your device lights on? Including Phone lights?
yes sir, figured I would share. Some might be in same position.
And thank you for the 3 awesome tech support guys I have been dealing with. Few minor problems that hopefully get worked out!
Submitted a support ticket about them, was told they should work off of HT502 settings.
They did not, today decided to try HT701 as the device based on Grandstream Stating HT701,HT702 use same...
Need to setup your router with QoS priority, and what degree of priority. It will slow down your computer and netflix speeds a bit while on calls, but ensures voice packets get first dibs.
I use Bria, and so do my clients.
more than welcome to.
interesting, i remember reading it, but best of luck! reselling is nice! you can offer things voipo cant (promos, etc etc)
yeah, idk, i went straight reseller, just saw it in there. if you wanna catch me about it you can reach me on Gtalk: sales.jeffgray@gmail.com
I can dig through.
i will have to go through my reseller terms and conditions (they are more detailed, like the ones emailed).
If you are trying to make money and dont want to resell why not join there affiliate...
My guess is something to do with keeping service working with IPv6 or carriers only going IP444
does your vpanel show the device active? with the proper MAC address from the device.
This would be in direct violation of VoIPo terms and Conditions. Congratulations.
Im assuming you are talking about a Grandstream HT502 for VoIPo adapter trying to get to work.
It needs to be plugged into the Internet, some way somehow, not the WAN port. You can see it because its now a networked device.... Reason you cant get dial tone, or calls in or out is a NAT issue. ...
If your ISP is going from "Nat44" to "Nat444" (Ipv4 to IPv4 to IPV4)in other words stretching out IPv4 and not deploying IPv6 then really what you have to do is ensure your network is on a 192....
if you are behind any type of firewall you need to disable all NAT.. just an FYI
i would do 2 things:
1. Contact support, if your number is now in the posession of VoIPo and the port is complete in there system cancel out the service. If finishing of port is in process (is...