Info needed, ie, ATA, network config, etcOriginally Posted by Montano
Senior Member
Re: VMWI won't turn off
Info needed, ie, ATA, network config, etc
my wish list:
- Intelligent Call Forwarding that detects the incoming call originated from the "forwarded" phone and rings the original destination instead
Call History that makes use of CallerID/Custom CallerID+Location. Call History only shows Custom CallerId+Loc. No CNAM look up; Albeitly,it's a step in the right direction!
- Scheduled sim. ring with a twist (see wish #1)
Senior Member
Re: VMWI won't turn off
PAP2T behind a WRT54GS running Tomato.
VWMI has been hit and miss since Voipo implemented it. I don't believe it's anything on my end, but I'm willing to try anything
Senior Member
Re: VMWI won't turn off
In doing some searching for the differences programmed into the GS502 from before the reg problem to after, I noticed that the following was changed...PAP2T behind a WRT54GS running Tomato.
VWMI has been hit and miss since Voipo implemented it. I don't believe it's anything on my end, but I'm willing to try anything
Yes, send periodical SUBSCRIBE for Message Waiting Indication
No, do not send SUBSCRIBE for Message Waiting Indication
Originally it was set to 'no' but after the last provision, it now says 'yes'
Except for seeing the difference, I have no further knowledge about how it should work as I don't use the system VM.
Senior Member
Re: VMWI won't turn off
The one thing I notice is that even thought there are no messages in any of my voicemail boxes, my PAP2T shows 'Message Waiting: Yes' on the Info page. So it would seem that it's not getting the message that there are no messages
Administrator
Re: VMWI OK on my HT502
FWIW: I've been noticing that the HT502 with UNIDEN phones has been working flawlessly lately.
Using VOIPo services since February 2007
Beta Tested the VOIPo Reseller Plan.
A happy VOIPo Residential Customer
Using VoIP devices since 12-2002
Companies I've tried
iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
VOIPo is a keeper!
Senior Member
Re: VMWI OK on my HT502
My HT-502 with a Panasonic 5 phone system works fine.
Senior Member
Re: VMWI won't turn off
I also have Uniden phones. Hopefully now that the PAP2T will be shipping, we can get this issue resolved. I know Tim will figure it out
Senior Member
Re: VMWI won't turn off
Gee, does anyone have any spare Uniden phones they can send me so I can test the MWI??I also have Uniden phones. Hopefully now that the PAP2T will be shipping, we can get this issue resolved. I know Tim will figure it out
Member
Re: VMWI OK on my HT502
I have the HT502 and UNIDEN phones as well, but the MWI problem persists.
Member
Re: VMWI won't turn off
I have a uniden dect 6.0 and the VMWI works most of the time. I have needed to reset it via vpanel a couple of times
Posting Permissions
Reply With Quote
Bookmarks