Page 2 of 18 FirstFirst 123412 ... LastLast
Results 11 to 20 of 175

Thread: Something stuck? No Vpanel or inbound calls

  1. #11
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Something stuck? No Vpanel or inbound calls

    I'm showing 4 lines registered for my two on the HT502.
    One is port 5062 and the other three are port 5079.


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


  2. #12
    Join Date
    Dec 2008
    Location
    Beaverton, OR
    Posts
    114

    Default Re: Something stuck? No Vpanel or inbound calls

    Mine was like that last week, actually maybe 2 weeks ago, except I had 6 lines registered.

  3. #13
    Join Date
    Dec 2008
    Location
    D/FW, TX
    Posts
    19

    Default Re: Something stuck? No Vpanel or inbound calls

    My ATA lost registration as well. Calls going to failover. Happened sometime between 10 am and 8:30 pm. ATA is attached directly to cable modem. Never had this issue prior to recent firmware upgrade. Not sure if it's related or not...

    A reboot of the ATA did NOT fix the problem.

  4. #14
    Join Date
    Sep 2008
    Location
    Southwest MO
    Posts
    219

    Default Re: Something stuck? No Vpanel or inbound calls

    I have had my 502 behind my router since day 1, before they enabled STUN and other NAT-Friendly settings. I never lost registration either until this latest firmware update.

  5. #15
    Join Date
    Dec 2008
    Location
    D/FW, TX
    Posts
    19

    Default Re: Something stuck? No Vpanel or inbound calls

    Quote Originally Posted by carlquist View Post
    My ATA lost registration as well. Calls going to failover. Happened sometime between 10 am and 8:30 pm. ATA is attached directly to cable modem. Never had this issue prior to recent firmware upgrade. Not sure if it's related or not...

    A reboot of the ATA did NOT fix the problem.
    Just to follow up. After waiting a little while then again rebooting my 502, it did re-register and is now showing in Devices on the vPanel.

  6. #16
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Something stuck? No Vpanel or inbound calls

    Our guys are working on this this week and we hope to have it fully nailed down by the end of the week. Unfortunately, it seems to be related to firmware.

    We're working on identifying exactly what the firmware issue is to see if it's something we can address without another firmware change. We'll likely make a decision tomorrow if we want to revert.

    It's not affecting everyone, but does seem to be affecting enough people to potentially justify rolling it back to the old firmware to give us some time to work it out with Grandstream.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  7. #17
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Something stuck? No Vpanel or inbound calls

    Is there anyone here who is experiencing this that is on the older firmware?
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  8. #18
    Join Date
    Dec 2008
    Location
    Bay Area
    Posts
    31

    Default Re: Something stuck? No Vpanel or inbound calls

    I use Asterisk 1.4.21.2 - usually in the night around 9 PM PST, a few times, the server takes a very long time to respond to register requests. Once it took around 20 seconds to respond, another time, 31 seconds. I have increased the registration timeouts on my server to 60 seconds to prevent my trunk from timing out. I am using central01. I have a ticket open on this - FJJ-815835.
    Last edited by zcnkac; 01-28-2009 at 12:21 AM.

  9. #19
    Join Date
    Nov 2008
    Location
    St. Paul, MN
    Posts
    49

    Default Re: Something stuck? No Vpanel or inbound calls

    Quote Originally Posted by VOIPoTim View Post
    Is there anyone here who is experiencing this that is on the older firmware?
    Yes - just posted on DSLR as well before I noticed this post. Still on old firmware and lost registration yesterday, rebooted and all was well. Also lost registration this morning - can not reboot till I get home in a couple hours though.

  10. #20
    Join Date
    Jan 2009
    Location
    California
    Posts
    23

    Default Re: Something stuck? No Vpanel or inbound calls

    Came unregistered again twice since yesterday afternoon
    Just found the last one about 5 minutes ago.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •