Something stuck? No Vpanel or inbound calls

[VOIPoTim]

As Brandon requested I tried a 1 800 number and it had the same issue and I called my cell XXX -XXXX and it had the problem. After reading your comment I tried dialing my cell with the area code and it worked fine.

So this is only 7 digits and 800 number?

Is this only on line 2 and they work fine on line 1?

[Xponder1]

So this is only 7 digits and 800 number?

Is this only on line 2 and they work fine on line 1?

100% correct. Line 1 is fine.

[scott2020]

Same here. Port 1 I can dial 7 digits and the call works. Port 2 I cannot dial 7 digits but 11 digit dialing works.

[VOIPoBrandon]

Alright guys, give the 7 digits a go -- and hold on the 800 numbers, due to the new registration on FXS2, we have to make some modifications to adjust. Please stand by.
________
Teen Vids

[scott2020]

7 digits worked for me just now on port 2.

[Xponder1]

Alright guys, give the 7 digits a go -- and hold on the 800 numbers, due to the new registration on FXS2, we have to make some modifications to adjust. Please stand by.

I tested and it worked fine. I did not read this until after I sent you the private message but I did test the 800 number you provided me and it worked fine.

Incoming and outgoing are both working.

[VOIPoTim]

Anything else anyone finding?

[Xponder1]

Anything else anyone finding?

Tried some more numbers including another 800# and all seem fine.

[VOIPoTim]

One more thing for you guys testing this...

Set "Unregister On Reboot" to Yes for both lines.

[Xponder1]

One more thing for you guys testing this...

Set "Unregister On Reboot" to Yes for both lines.

Done and tested to confirm still working fine.