Line disconnecting going to fast busy

[VOIPoTim]

Yes, he tried to call twice but the line doesn't work

I'll PM another number.

Did you upgrade your firmware recently? We just noticed you're on 5.1.6.

Try downgrading to 5.1.1 and it should work fine.

We're going to see what's going on with 5.1.6 and see if we can fix that on our end too.

[Montano]

No firmware upgrade since I've had Voipo.... about 2 1/2 years.

Brandon was great to work with even though we could not get things working. I told him my line has been flawless since Voipo's inception He was calm for the entire hour we spent on the phone.

[Montano]

My lines are working

I did not downgrade the firmware.... or do anything for that matter.

Thanks for getting me going again !

[darylo]

I had this exact same issue with my pap2. I think it was Brandon that deleted the registrations out and it has worked since.

[Montano]

My same symptoms are back today. Line was not registered this morning and incoming calls have no audio, then fast busy. Each reboot of the PAP2 multiplies the number of devices registered, I'm now @ 6. Settings are still as Brandon had me put them.

[Montano]

As a reference, I have a PAP2 connected with 2 different providers on line 1 and 2. I am able to call from either line to either line with no audio or disconnect issues. My Voipo PAP2T is connected to the same router, which leads me to believe the issues are not on my network.

I am also able to place and receive calls from my Grandstream IP phone, without issue. This phone is also connected to the same router as the 2 PAP2's.