Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 53

Thread: <!doctype Html

  1. #21
    Join Date
    Feb 2009
    Posts
    121

    Default Re: <!doctype Html

    Quote Originally Posted by sr98user View Post
    If your Line 1 port is 5060, and if it is being used by another node in your network, then it might pick a different outgoing global port.
    I have a CallVantage box on my network too. I wonder if it is interfering? I cannot seem to get into it (well, maybe I can if I hook a laptop up to it with a wire into the LAN port) to see what port it is using, and I don't see anything in the router log.

  2. #22
    Join Date
    Sep 2008
    Posts
    116

    Default Re: <!doctype Html

    I also noticed that your PAP2T is running a pretty old firmware. You might ask support about upgrading to 5.1.6(LS).

  3. #23
    Join Date
    Dec 2008
    Posts
    200

    Default Re: <!doctype Html

    Quote Originally Posted by abward View Post
    I have a CallVantage box on my network too. I wonder if it is interfering? I cannot seem to get into it (well, maybe I can if I hook a laptop up to it with a wire into the LAN port) to see what port it is using, and I don't see anything in the router log.
    If its using port 5060 (which is a good possiblity), then your router will pick another outgoing global port. But you router should map the traffic on inbound correctly. I am guessing maybe your firewall is blocking the traffic for the incoming traffic.

  4. #24
    Join Date
    Feb 2009
    Posts
    121

    Default Re: <!doctype Html

    Screw my big upload. I turned off all 4 of the ALG settings and I am back up. My VPN works fine. Less is more!

    I guess time will tell now, unless Brandon comes up with a tweak to try.

    Tim,

    Any comment on the firmware level?
    Last edited by abward; 02-27-2009 at 01:06 PM.

  5. #25
    Join Date
    Feb 2009
    Posts
    121

    Default Re: <!doctype Html

    sr98user,

    Hmmmmm, I do see this in the log. Why are two different addresses trying to go to port 5060?

    Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:03:12 2009 Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:03:07 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:03:06 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:03:03 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:03:02 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:55 2009 Blocked incoming TCP packet from 64.12.165.99:5190 to 69.134.160.41:3398 as ACK received but there is no active connection
    [INFO] Fri Feb 27 14:02:54 2009 Blocked incoming UDP packet from 68.109.3.50:24844 to 69.134.160.41:35658
    [INFO] Fri Feb 27 14:02:52 2009 Blocked incoming UDP packet from 208.43.132.146:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:51 2009 Blocked incoming UDP packet from 208.43.132.146:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:50 2009 Blocked incoming UDP packet from 67.228.251.106:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:49 2009 Blocked incoming UDP packet from 67.228.251.106:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:37 2009 Blocked incoming UDP packet from 66.229.37.221:16237 to 69.134.160.41:39362
    [INFO] Fri Feb 27 14:02:28 2009 Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:27 2009 Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:21 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:20 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:20 2009 Blocked incoming UDP packet from 68.109.3.50:24844 to 69.134.160.41:35658
    [INFO] Fri Feb 27 14:02:16 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:15 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:05 2009 Blocked incoming UDP packet from 67.228.251.106:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:04 2009 Blocked incoming UDP packet from 208.43.132.146:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:02:04 2009 Blocked incoming UDP packet from 67.228.251.106:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:03 2009 Blocked incoming UDP packet from 208.43.132.146:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:02:02 2009 Blocked incoming UDP packet from 92.32.243.239:36134 to 69.134.160.41:3711
    [INFO] Fri Feb 27 14:01:55 2009 Blocked incoming TCP packet from 64.12.165.99:5190 to 69.134.160.41:3398 as ACK received but there is no active connection
    [INFO] Fri Feb 27 14:01:49 2009 Blocked incoming UDP packet from 68.109.3.50:24844 to 69.134.160.41:35658
    [INFO] Fri Feb 27 14:01:43 2009 Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:01:42 2009 Blocked incoming UDP packet from 74.55.77.234:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:01:36 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:01:35 2009 Blocked incoming UDP packet from 174.132.131.131:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:01:29 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:5061
    [INFO] Fri Feb 27 14:01:28 2009 Blocked incoming UDP packet from 208.43.97.218:5060 to 69.134.160.41:51216
    [INFO] Fri Feb 27 14:01:26 2009 Blocked incoming UDP packet from 68.109.3.50:24844 to 69.134.160.41:35658
    [INFO] Fri Feb 27 14:01:19 2009 Blocked incoming UDP packet from 67.228.251.106:5060 to 69.134.160.41:5061
    Last edited by abward; 02-27-2009 at 01:10 PM.

  6. #26
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: <!doctype Html

    More than likely that's the issue. It's possible it's just getting the 2 lines mixed up and 1/2 the data is going to one, 1/2 the other.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  7. #27
    Join Date
    Feb 2009
    Posts
    121

    Default Re: <!doctype Html

    I am sorry, what do you mean Tim, the router config, or the CallVantage adapter?

    Should I be switched to another port (assuming VOIPo can do that), to stay away from the CallVantage traffic?
    Last edited by abward; 02-27-2009 at 01:22 PM.

  8. #28
    Join Date
    Apr 2008
    Location
    Aventura Fl
    Posts
    860

    Default Re: <!doctype Html

    Quote Originally Posted by bretski View Post
    I also noticed that your PAP2T is running a pretty old firmware. You might ask support about upgrading to 5.1.6(LS).
    The 3.1.15(LS) wcame with the PAP2Ts that VOIPo sent us..

    I wouldn't touch it until Tim wants to upgrade it..Besides, I have the same box and with the exception of the radius problem, it hasn't missed once.

  9. #29
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: <!doctype Html

    I mean the config.

    If you know what port Callvantage is using though, we should definitely try to avoid that port and can change it.

    Does anyone here know what it uses?
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  10. #30
    Join Date
    Dec 2008
    Posts
    200

    Default Re: <!doctype Html

    Once it fails connecting with one SIP server, the phone adapter checks the next SIP server using the DNS SRV record, I believe. That's probably why east01, west01, sip, central01 are all trying to talk to your adapter. I think if you turn off SPI, you should be good to go. If it still does not work, then change the local port for Line1 from 5060 to something like 5062.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •