Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47

Thread: Alpha Feature: Remote Access - Control Features/Dial Out

  1. #1
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Alpha Feature: Remote Access - Control Features/Dial Out

    Soon we'll be launching VOIPo Connect which allows you to use an access number from another phone to login to your VOIPo account to place calls and control features.

    This is NOT production ready yet and will have a lot of bugs. This first version is just to get feedback and have you guys test it to find all the bugs. We think we've found and fixed most of them, but with real-world use a lot more scenarios are always in play and more always come up.

    Once this is live, we'll have access numbers throughout the country and a few international ones as well.

    Test Access Number: 714-209-7280

    Once you dial the access number, here are your options:

    1) Call a number on the VOIPo network (anyone can do this).

    2) Press * to login to your VOIPo residential account using your voicemail PIN.

    3) Once logged in, you can dial out. Caller ID shows your VOIPo number. International is NOT enabled on this yet until we're 100% sure the call accounting is working correctly.

    4) Once logged in, you can use all the star codes such as forwarding, etc.


    We think the basic functionality is pretty well tested now though internally. Once we fix any bugs, add some error handling, and make sure we're sticking to this navigation layout, we'll redo all the recordings so they're not the text to speech ones and launch it.

    We also have additional functionality that we previously posted about that we'll be adding soon, but we wanted to get the basic version out for testing so it can be released soon. We've been hammered with our former Callvantage users wanting to control their features remotely by phone.

    Can you guys go through this and see what all bugs you can come up with?
    Last edited by VOIPoTim; 06-12-2009 at 11:24 PM.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  2. #2
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Can you guys go through this and see what all bugs you can come up with?

    Please post them here in this thread.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  3. #3
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Feature Code List for Reference:

    *20 - Call Forwarding (Include Destination Number)
    Example: *205551113333

    *21 - Disable Call Forwarding

    *22 - Do Not Disturb - Send to Busy

    *23 - Do Not Disturb - Send to Voicemail

    *24 - Disable Do Not Disturb

    *25 - Set Failover Number (Include Destination Number)
    Example: *255551113333

    *26 - Set Failover to Voicemail

    *27 - Blacklist Last Caller

    *67 - Block Caller ID (For Next Call Only)

    *30 - Block Caller ID (For All Calls)

    *68 - Unblock Caller ID (For One Call)

    *31 - Unblock Caller ID (For All Calls)
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  4. #4
    Join Date
    Feb 2007
    Posts
    25

    Unhappy Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Tried calling my voipo number from 2 other phones lines. The nice lady said that the number I dialed was NOT a voipo number.

    Bummer!

    Thats as far as I got.

    Terry

  5. #5
    Join Date
    Feb 2007
    Posts
    801

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    I've found a few, but still need to test more later...

    1. If the voicemail password is not 4 digits long, you cannot authenticate.
    2. When I used the dialout feature, I got the voipo connect number on my CID, not MY Voipo number.
    3. When i set call forwarding, calls to my voipo line are met with dead air for 15-20 seconds, followed by fast busy. I think this may be a bug with call forwarding, not Voipo connect. The forward-to number was properly listed in my vPanel.
    4. I also got the "that is not a valid voipo number" when attempting to use Connect to dial my voipo line.

    As I said, more playing to do later to test more.

    Edit: The forwarding problem seems to be dependent on the target number for call forwarding.
    Last edited by fisamo; 06-14-2009 at 04:12 PM. Reason: a little more detail...

  6. #6
    Join Date
    Feb 2007
    Posts
    280

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Worked for me. Old robot voice lady guided me through the steps and I got to listen to Pittsburgh T&T.

    Call did not show in my call history afterward!

  7. #7
    Join Date
    May 2009
    Posts
    325

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    I got "not a VOIPo number." It also said current VOIPo customers could ress *4 for more options. I did so, whereupon it asked for a password (not a customer number first), and then of course rejected my password.

  8. #8
    Join Date
    Dec 2008
    Location
    Tulsa, Oklahoma
    Posts
    538

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Dialed and and tried to call my number 918-*** **** and received the same message as others that its not a valid number.

    Pressed * then my number and my 4 digit password and tried to call my wifes cell. She did not answer but said it was a 714 number calling when I called her from home.

    Edited out this part after I read the original post again.

    Thanks,
    Last edited by Xponder1; 06-17-2009 at 05:37 PM.

  9. #9
    Join Date
    Feb 2007
    Location
    Maryland
    Posts
    314

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Interesting...the caller ID passed through was not my number, but the 714 access number.

  10. #10
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Alpha Feature: Remote Access - Control Features/Dial Out

    Not a valid voipo phone number.
    Hitting * and access code could call wife's 248-xxx-xxxx work number.
    (Also navigated the interactive OK)
    Hitting * and access code, called my VOIPo number and went straight to VM.

    Encouraging compared to the old access number experiment.


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •