Feature Code/Star Code List

[VOIPoTim]

*20 - Call Forwarding (Include Destination Number)
Example: *205551113333

*21 - Disable Call Forwarding

*22 - Do Not Disturb - Send to Busy

*23 - Do Not Disturb - Send to Voicemail

*24 - Disable Do Not Disturb

*25 - Set Failover Number (Include Destination Number)
Example: *255551113333

*26 - Set Failover to Voicemail

*27 - Blacklist Last Caller

*67 - Block Caller ID (For Next Call Only)

*30 - Block Caller ID (For All Calls)

*68 - Unblock Caller ID (For One Call)

*31 - Unblock Caller ID (For All Calls)

[MisterEd]

[strike] Are these codes updated and correct? I tried the *20<destnumber> call forwarding code and get a "thank you" response but forwarding doesn't work.

Yes, I know I can do it through vPanel. [/strike]

Sorry ... I guess I didn't wait long enough. I did it again then reset my ATA and CF was active. (I see "strike" doesn't work )

[zippy114]

add *123 to access voicemail.

[bridger]

You don't need to use the *. 123 will do it.

[chevyman]

Tim

Why is the *68 - unBlock Caller ID (For Next Call Only) is used when for the last 15+ years POTS have been using *82 - unBlock Caller ID (For Next Call Only)

[usa2k]

This seems a longer list.
http://www.voip.com/help/residential...tar_codes.aspx

In the old beta testing days, I understood VOIPo used codes from recognized standards.
I think those old treads are gone now, but I recall one of the VOIPo engineers posted
a link to these standards.

[chevyman]

This seems a longer list.
http://www.voip.com/help/residential...tar_codes.aspx

In the old beta testing days, I understood VOIPo used codes from recognized standards.
I think those old treads are gone now, but I recall one of the VOIPo engineers posted
a link to these standards.

i think this needs to be changed to *82 because my tmobile, qwest even teleblend a voip uses it. and just the other day i call someone with my number blocked and a recording can on saying "the you are calling do not accept blocked call, please hung up dial *82 your number be unblock for this call only" I could see this being a customer service issue when my customers call me saying they dialed *82 and it didn't let the call through.

I think out of all the *codes the *67 and *82 are the ones that will have the most problems with customers. the other *codes are all over the board with what other carriers use.

[BillG49]

This seems a longer list.
http://www.voip.com/help/residential...tar_codes.aspx

Sorry, but I think that link is for a different company.

[chevyman]

This seems a longer list.
http://www.voip.com/help/residential...tar_codes.aspx

In the old beta testing days, I understood VOIPo used codes from recognized standards.
I think those old treads are gone now, but I recall one of the VOIPo engineers posted
a link to these standards.

i think this needs to be changed to *82 because my tmobile, qwest even teleblend a voip uses it. and just the other day i call someone with my number blocked and a recording came on saying "the number you are calling do not accept blocked calls, please hang up dial *82 your number will be unblock for this call only" I could see this being a customer service issue when my customers call me saying they dialed *82 and it didn't let the call through.

I think out of all the *codes the *67 and *82 are the ones that will have the most problems with customers. the other *codes are all over the board with what other carriers use.

[ThorsDad]

What about this one:

*28 - Call Record
Example: *288005558355 would record a call to 8005558355