Well, I am pleased to announce that the new sip credentials worked great! I was able to call out and receive a call.

The problem now, is that I was only able to receive ONE call. Now, I get the same "The number or code you dialed is invalid..." error on any inbound call. I have a feeling we're so close it's almost painful!

So here's what I have so far:

- I have an inbound route with any CID and any DID forwarded to X-200. (I haven't tried my "Ring All Extensions" yet..)
- X-200 and the WiFi phone can both call out till the cows come homw. This has remained unchanged.

- My registration string for the trunk is: (phone #): (BYOD password)@sip.voipwelcome.com/(phone #)
Note: There is no space between my BYOD password and the colon, just if I try to do so here, it shows up as a


My Outgoing Settings:
disallow=all
username=(Phone #)
type=peer
secret=(BYOD password)
qualify=yes
nat=yes
insecure=port,invite
host=sip.voipwelcome.com
fromuser=(Phone #)
fromdomain=sip.voipwelcome.com
context=from-sip
allow=ulaw

My Incoming settings:
disallow=all
type=peer
secret=(BYOD Password)
qualify=yes
nat=yes
insecure=port,invite
host=sip.voipwelcome.com
context=from-sip
allow=ulaw

What am I missing? Do I need to address the issue right now with the device registration from vPanel where it shows (phone #)@Local net IP address