Quote Originally Posted by SpaethCo View Post
I had no problems at all gettting * talking to the BYOD server -- the only time I plugged in the shipped adapter was when I initially got it to be able to get my SIP credentials, and then for some testing for a couple days.

Here's the FreePBX trunk config I used:

Dial rules:
Code:
911
1NXXNXXXXXX
1+NXXNXXXXXX
1763+NXXXXXX
Outgoing:
Code:
username=763NPXXXXX
type=peer
session-timers=accept
session-refresher=uac
secret=as3cr37
rfc2833compensate=yes
qualify=5000
nat=no
insecure=port,invite
host=sip.voipwelcome.com
dtmfmode=auto
disallow=all
context=from-trunk
canreinvite=no
allow=ulaw
Incoming settings: Leave this entire section blank

Register:
Code:
763NPXXXXX:as3cr37@sip.voipwelcome.com:5060/763NPXXXXX
Then setup an inbound dial rule to match your DID.

Note: If you're behind a NAT device, make sure to set NAT=yes, define a port range in rtp.conf, setup externip or externhost + localnet in sip_general_custom.conf to define your external and internal IP ranges, and of course forward UDP port 5060 + your UDP RTP port range on your public IP-facing NAT device to point in at your * box.
This worked perfectly. Thanks for the help!