Results 1 to 4 of 4

Thread: Supported as Managed ATA?

  1. #1
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Supported as Managed ATA?

    Tim,

    Are there more than PAP2T and RT31P2 from Cisco
    that VOIPo will officially support as a Managed ATA on
    a Reseller Account?

    Putting the RT31P2 into https://reseller.voipwelcome.com/hardware/configure as "Provision My Device" will list the device under the account on the Account Page, and I can see selecting Reboot seems to reboot the device. I also see reboot waits until the user hangs up. It seems to get queued to complete a reboot.

    The RT31P2 does not seem to become managed or locked that I can tell.

    The https://reseller.voipwelcome.com/hardware/configure link has a stub for "Give Me Proxy Settings".
    Are these settings intended to be different from the settings listed on the account already?


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


  2. #2
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Supported as Managed ATA?

    I also see https://reseller.voipwelcome.com/hardware/purchase
    for ordering hardware lists accounts I have created and canceled.

    Surely hardware cannot be ordered via this interface as there is no https://reseller.voipwelcome.com/billing/update page or a means to charge a real credit card- at least not for my setup I am testing.


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


  3. #3
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Supported as Managed ATA?

    Right now we're only going to "officially" support PAP2/PAP2T and RT31P2 since those are the devices we've used in production.

    Quote Originally Posted by usa2k View Post
    The RT31P2 does not seem to become managed or locked that I can tell.
    Is it not provisioning it? It should be the same as our system.


    Quote Originally Posted by usa2k View Post
    The https://reseller.voipwelcome.com/hardware/configure link has a stub for "Give Me Proxy Settings".
    Are these settings intended to be different from the settings listed on the account already?
    No these are just to consolidate all hardware management/provisioning in one place. It's basically the BYOD credentials that you'd use to configure a different brand of device.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  4. #4
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Supported as Managed ATA?

    It is not a locked device - could it be that while I experimented unlocked, I changed the admin password?

    The menus did not seem really advanced to me as I expected - did not see a good way as BYOD to assign a port number - it just defaulted to 5060 and 5061.

    XJU-938244 Titled "Canceled Virtual Line/Provisioning"

    Canceled Virtual Line taken care of on: SHK-440697


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •