Softphone Question

**rcrcr** · 04-11-2010 10:03 PM

Hi,

I am potentially interested in porting my Vonage service to VoIPo.

In doing so, I'd ideally like a VoIPo ATA in my apartment, and a SIP app on my iPhone.

Does VoIPo support multi-presence so that I could simultaneously register both the ATA and the softphone to the single DID I'd be porting in from Vonage?

Thanks,
rcrcr

**Russell** · 04-12-2010 05:29 AM

Originally Posted by rcrcr

Hi,

I am potentially interested in porting my Vonage service to VoIPo.

In doing so, I'd ideally like a VoIPo ATA in my apartment, and a SIP app on my iPhone.

Does VoIPo support multi-presence so that I could simultaneously register both the ATA and the softphone to the single DID I'd be porting in from Vonage?

Thanks,
rcrcr

The last time I tried this the one which registered last "won" out (for incoming calls). I believe the feedback from VOIPo was both should have received the call. This was using a softphone on a laptop (not an iPhone app).

**VOIPoTim** · 04-12-2010 03:44 PM

Originally Posted by Russell

The last time I tried this the one which registered last "won" out (for incoming calls). I believe the feedback from VOIPo was both should have received the call. This was using a softphone on a laptop (not an iPhone app).

This is fixed now. Some of our newer servers were not added into the check for multiples (but are now).

If you have multiple registrations, all will ring.

**rcrcr** · 04-12-2010 07:10 PM

And there is no extra fee for a second registration? If so, that's great, Tim.

Thanks,
rcrcr

**Zion21** · 04-28-2010 05:22 PM

If there is no second registration fee that would be great. VOIPo seems like a great service!

**dlangley** · 04-29-2010 09:40 AM

Tim,
Earlier in this thread you said that the registration problem was fixed. Yesterday while doing some testing I had registered a linksys spa-508g and while it was registered calls only rang on the 508 and not the ata.

**VOIPoTim** · 05-12-2010 05:17 PM

Originally Posted by dlangley

Tim,
Earlier in this thread you said that the registration problem was fixed. Yesterday while doing some testing I had registered a linksys spa-508g and while it was registered calls only rang on the 508 and not the ata.

We'll double check it, but it should be working 100% now.

Were they behind a single router? It should work fine if on different networks, but if behind same network, the behavior will be sporadic since the router will almost always mix the traffic.