Anybody got Linksys SPA-2102 to work on voipo

[timreichhart]

Hey Guys
I am just wondering if anybody got linksys spa-2102 to work on voipo provisioning system? because I was looking at: http://ui.linksys.com/files/SIPURA/S...nced_Voice.htm and http://support.voipo.com/screenshots/pap2t/ looks like they both got the same settings for factory.

[burris]

I put mine back in service a few weeks ago and it's working fine.

[timreichhart]

can you post any screenshots of what you did to get to work to make sure of that the settings with voipo is going to work?

[tritch]

I have a SPA-2102 connected, but it's not provisioned by Voipo. If you want it provisioned by Voipo, you will have to ask Support. I'm not sure they will do that anymore since they explicitly state they don't support BYOD:

http://voipo.com/help/article/does-v...ervice-89.html

Most of the settings are exactly the same in the SPA-2102 vs the PAPT2. However, the SPA-2102 has some additional settings which are not available in the PAP2T. An example would be the DTMF strict settings available in the latest firmware release. I suppose Voipo's PAP2T provisioning profiles may be compatible and will likely work, but it won't be 100% correct.

[burris]

can you post any screenshots of what you did to get to work to make sure of that the settings with voipo is going to work?

I'm grandfathered in so I would have to check with Tim to see if it would be OK to do this. I personally have no problem doing it.
I don't know if you are BYOD or provisioned or?

[timreichhart]

well see I got a reseller account that is why I am asking.