Since I don't have access to the alpha groups to search for further information, I am posting here.

I am using an adapter originally from Packet 8. I have loaded full open firmware so everything can be set. I will buy a voipo adapter soon but need to use this in the meantime.

When I first entered the SIP settings, everything worked, I could send and receive calls. Now, with changing nothing, I can no longer dial a number but I can receive calls still. After dialing the number I get a busy signal, whether doing 7 or 10 digit dialing.

Here is what I have set up:

server address: codeblue.voipo.com
port: 5060
domain name: (blank)

phone number: (my current phone number but am using a virtual # until porting is done) and current phone number and password for authentication.

sip port 5060

base rtp and sip port: 5060

dial plan: xxxxxxx|1xxxxxxxxxx|x.T|x.#

Send Out-Of-Band Telephone Events: RFC 2833
RFC2833 signalling using payload value: 101
Call Signalling Packets: B8
RTP packets: B8

lots of other info but I don't think it is affecting dialing out

codecs in use:

G711U
G711A
G729

adaptive jitter buffer: 30ms


any suggestions on why I can no longer call out but was working fine a couple of days ago?