Results 1 to 8 of 8

Thread: Using VOIPo with IP phone (Panasonic)

  1. #1
    Join Date
    Dec 2009
    Location
    MA
    Posts
    166

    Default Using VOIPo with IP phone (Panasonic)

    Granted I won't be officially supported any longer if I switch... Will VOIPo play nicely with a Panasonic KX-TGP550 IP Phone? I've heard some really good things about IP phones vs using an ATA.

    Thoughts?

    -Craig
    Comcast -> SB6120 -> WRT54GL (Tomato 1.27) -> PAP2T
    Tomato settings: Ports Fowarded: 5000-65000 UDP, UDP Unreplied Timeout: 10, UDP Assured Timeout: 300, QoS Enabled, Static DHCP to PAP2T MAC address

  2. #2
    Join Date
    Jun 2012
    Posts
    14

    Default Re: Using VOIPo with IP phone (Panasonic)

    I would like to do the same - can anyone comment?

  3. #3
    Join Date
    Dec 2010
    Location
    Austin, Texas
    Posts
    34

    Default Re: Using VOIPo with IP phone (Panasonic)

    Look for the credentials in you vpanel.

  4. #4
    Join Date
    Jul 2012
    Posts
    7

    Default Re: Using VOIPo with IP phone (Panasonic)

    I also have a panasonic tgp551, and the codec's listed include: G722 and G729A. It does NOT have G711, which I see on the forums is supposedly the only codec for VOIPO! Does anyone know if this is actually the case? I believe I found a review of the Panasonic phone on Amazon in which the author claimed to have VOIPO running on one line....

  5. #5
    Join Date
    Apr 2008
    Location
    Aventura Fl
    Posts
    860

    Default Re: Using VOIPo with IP phone (Panasonic)

    Quote Originally Posted by Goldstrom View Post
    I also have a panasonic tgp551, and the codec's listed include: G722 and G729A. It does NOT have G711, which I see on the forums is supposedly the only codec for VOIPO! Does anyone know if this is actually the case? I believe I found a review of the Panasonic phone on Amazon in which the author claimed to have VOIPO running on one line....
    This is what their specs show....

    http://www.telecomchicago.net/panasonic-KX-TGP551.html

  6. #6
    Join Date
    Jul 2012
    Posts
    7

    Default Re: Using VOIPo with IP phone (Panasonic)

    Thanks; on the phone itself, it "hides" the G.711 A-law codec as PCMA!

  7. #7
    Join Date
    Jun 2012
    Posts
    14

    Default Re: Using VOIPo with IP phone (Panasonic)

    I have a 550 working with Voipo, though haven't figured out how to get the Voicemail button to dial voicemail yet. I also have a somewhat long delay on outbound dialing, but I don't think that's a Panasnic issue.

    I'll post some 550 specific notes tomorrow.
    Last edited by jfh; 07-12-2012 at 10:25 PM.

  8. #8
    Join Date
    Jul 2012
    Posts
    7

    Default Re: Using VOIPo with IP phone (Panasonic)

    Thanks; I got the voicemail working: From the Panasonic's web interface, on the TELEPHONE tab, click on call control, line 1 and enter "123" (without the quotes ) for the Voice Mail Access Number.
    Still interested in your notes, as I am not sure I have my settings right. The biggest pain with the Panasonic is setting the registration interval down to 10 minutes (600) which requires a TFTP provided configuration file as it cannot be set through the web interface. I've had to reboot and re-provision with the file about a hundred times before it actually took!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •