Results 1 to 6 of 6

Thread: Obi100 Configuration-help

  1. #1
    Join Date
    Jun 2012
    Location
    CT
    Posts
    13

    Default Obi100 Configuration-help

    Hi there,

    I just purchased the Obi100 and I am trying to get it to work with Voipo. How do I do this? I thought Voipo was a preconfigured provider but I am not seeing how to set that up. Can someone walk me through it?

    Thanks,

    Chris

  2. #2
    Join Date
    Jun 2012
    Location
    CT
    Posts
    13

    Default Re: Obi100 Configuration-help

    Well, I think I figured it out. Looks like I only needed the username, password, and the Sip. I used sip.voipwelcome.com for the SIP. So, I'm guessing this is pretty much all I have to do since I can make/receive calls. One thing I noticed though is that when I make an outgoing call to a Verizon Cell, there is about a 10 second lag before I hear a ring. That never happened on the Grandstream. So, not sure if there is another setting I should change to fix that lag.

    Otherwise, both incoming and outgoing calls seem to work.

    Thanks,

    Chris

  3. #3
    Join Date
    Feb 2009
    Location
    Houston suburb
    Posts
    253

    Default Re: Obi100 Configuration-help

    I believe you will need to log into the ObiTalk web portal and select your VOIP provider to have it auto config for you.

    See this link:
    http://www.obihai.com/itspsetup.html

    Does VOIPo show up in the ITSP selection list?
    Last edited by tritch; 01-13-2013 at 12:55 PM.

  4. #4
    Join Date
    Jun 2012
    Location
    CT
    Posts
    13

    Default Re: Obi100 Configuration-help

    Hi Tritch,

    Yes, you are correct. What I originally did was use the wizard on the support page, which did not have Voipo listed, for some reason. However, once I registered my device on their website, then it prompted me to set it up with a provider, and on that list, Voipo was listed. So, it is all set and seems to be working fine now.

    Thanks again.

    Chris

  5. #5
    Join Date
    Dec 2011
    Posts
    103

    Default Re: Obi100 Configuration-help

    chriswx
    Voipo was added just a month or two ago... But the basic set up is - like you said - name / password / server.

    The delay to a certain number maybe caused by DigitMap settings. Try to press # after the number and see if it solves the problem.

    If you have another provider set up as well (Google Voice or another SIP provider) - you need to figure out how to specify which provider to use (hint: **2). Otherwise, you may never need to go to "Expert configuration" or learn what "DigitMap" means

  6. #6
    Join Date
    Jun 2012
    Location
    CT
    Posts
    13

    Default Re: Obi100 Configuration-help

    Hi Ymhee,

    Yes, I actually did have to go into the Expert Configuration to turn on the message waiting indicator. For some reason that was turned off and I wasn't getting the voicemail notifications. But, I did a web search and found out the answer easy enough. Also, once I did set up the phone via the Obitalk registration page, I was no longer getting the delays. So, I guess it configured something differently than the wizard I initially used to set it up.

    Anyway, it's been working great with no problems the past 2 days, so I think I'm all set. For now anyway.

    Chris

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •