Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Remote Access Features - Prototype/Alpha

  1. #11
    Join Date
    Mar 2007
    Location
    Operator...I've been Cut off! (Marie Antoinette's Last Voip Call)
    Posts
    569

    Default Re: Remote Access Features - Prototype/Alpha

    Quote Originally Posted by VOIPoTim View Post
    So basically DTMF recognition and the prompts seem to be the biggest problem? This def needs a lot of work, but should come together pretty quick once we start working on it. It's just kind of sitting on the backburner for now.
    Well it will be hard to tell what else is not working unless we get past step 1 which is being able to dial in and then dial out so yes, the DTMF thing seems to be the biggest issue.

    I'd say we all need to test it:

    1. from a land line (POTS) if possible
    2. from a cell phone. The DTMF length setting on the phone may be set to "short" which could trigger a false sense that the voipo feature is not working.
    3. test is from other voip services and note the differences in behavior.

  2. #12
    Join Date
    Mar 2007
    Location
    Operator...I've been Cut off! (Marie Antoinette's Last Voip Call)
    Posts
    569

    Default Re: Remote Access Features - Prototype/Alpha

    Quote Originally Posted by VOIPoTim View Post
    So basically DTMF recognition and the prompts seem to be the biggest problem? This def needs a lot of work, but should come together pretty quick once we start working on it. It's just kind of sitting on the backburner for now.
    As of yesterday, call attempts to this beta/backburner/test number were not completing.

    FYI

  3. #13
    Join Date
    Dec 2007
    Location
    Jasper, TN
    Posts
    71

    Default Re: Remote Access Features - Prototype/Alpha

    Just tried it for the first time using my Sprint cell (Treo 700wx) and it does not recognize my *

    Also the initial voice prompt starts at: "voipo number of the party you are trying to reach".

    I'm assuming it says "enter" or "please enter" before that, but several tests the beginning gets chopped by the time I hear it.

  4. #14
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Remote Access Features - Prototype/Alpha

    When I tried it before, you needed to assume the prompts happened, but were mostly never heard. definitely needed fine tuning. Otherwise a cool experiment.


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


  5. #15
    Join Date
    Dec 2007
    Location
    Jasper, TN
    Posts
    71

    Default Re: Remote Access Features - Prototype/Alpha

    Yes... I don't how much of a need I would have for it personally, but it's always nice to have options.... lots of them for 'just in case'

  6. #16
    Join Date
    Dec 2008
    Location
    San Jose, CA
    Posts
    56

    Default Re: Remote Access Features - Prototype/Alpha

    This a nice feature. I tried to call the demo number and I'm getting "We are not able to complete this call Messgae 12 switch 540". Do you have any 925/408/650 area code # for this feature?

    Thanks
    -S

  7. #17
    Join Date
    Feb 2007
    Location
    Irvine CA
    Posts
    1,542,128,044

    Default Re: Remote Access Features - Prototype/Alpha

    Quote Originally Posted by rx100 View Post
    This a nice feature. I tried to call the demo number and I'm getting "We are not able to complete this call Messgae 12 switch 540". Do you have any 925/408/650 area code # for this feature?

    Thanks
    -S
    This was an alpha feature we tried, but it didn't make it into launch.

    It may later, but it's not yet.
    Timothy Dick
    Founder/CEO
    VOIPo.com

    Interact with VOIPo: Twitter, Facebook

  8. #18
    Join Date
    Feb 2007
    Posts
    801

    Default Re: Remote Access Features - Prototype/Alpha

    Understandable that it didn't make launch, as it will be somewhat development-intensive to get it all working correctly. That said, though, it's a great feature, and I'd love to see it come back. When you need the next rollout beta-tested, let me know.

  9. #19
    Join Date
    Dec 2008
    Location
    San Jose, CA
    Posts
    56

    Default Re: Remote Access Features - Prototype/Alpha

    Please let me also know when you need the next rollout beta-tested

  10. #20
    Join Date
    Feb 2007
    Location
    Michigan
    Posts
    2,220

    Default Re: Remote Access Features - Prototype/Alpha

    This is a great feature once it is implemented well.
    If it can be setup with CID to work like a cardless calling card, it would fit this longish thread.
    http://www.dslreports.com/forum/r217...ss-from-Canada


    Using VOIPo services since February 2007
    Beta Tested the VOIPo Reseller Plan.
    A happy VOIPo Residential Customer

    Using VoIP devices since 12-2002
    Companies I've tried
    iConnectHere|Vonage|BroadvoxDirect|Vonage|Packet8| VOIPo
    VOIPo is a keeper!


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •