Freeswitch

**dswartz** · 12-23-2008 06:39 AM

I've been curious once or twice, but I have a stable system here, so... I am running asterisk 1.6 with freepbx 2.5 on my firewall/gateway (clarkconnect 4.3, based on RHEL4).

**chpalmer** · 01-21-2009 11:29 PM

The "so far" report...

Getting an ATA to play nice took some work but the GS 502 seems to just fine. Found that with the Zoom 5822 theres no way to specify two different local server ports i.e. 5060, 5061... I dont remember if that was covered here before. Otherwise it seems to work ok for one line...

Ive had this up and working for a little over two weeks and absolutely love it. Its a very educational project...

**usa2k** · 07-20-2010 04:39 PM

chpalmer, you must be a pro now

I plan to eventually figure out FreeSwitch.
My $25 FS Server is a small investment to experiment.

Have not even got X-Lite to register locally yet ...

**timreichhart** · 07-21-2010 02:30 PM

well see I got my freeswitch to work but can only get audio to work on outbound not inbound and I was able to get my voipo number to work on x-lite. I am also still trying to figure out why I cant get get incoming to work on my shoreline ip 100 phone to work.

**usa2k** · 07-21-2010 03:50 PM

I was hoping to get X-Lite working as an extension.
Once that worked, I was going to see if VOIPo would work outbound.

I either don't have the 1001.xml being seen, or not sure what?

Code:

root@DockStar:/etc/freeswitch/directory/default# cat 1001.xml
<include>
  <user id="1001">
    <params>
      <param name="password" value="4321"/>
      <param name="vm-password" value="1001"/>
    </params>
    <variables>
      <variable name="toll_allow" value="domestic,international,local"/>
      <variable name="accountcode" value="1001"/>
      <variable name="user_context" value="default"/>
      <variable name="effective_caller_id_name" value="Extension 1001"/>
      <variable name="effective_caller_id_number" value="1001"/>
      <variable name="outbound_caller_id_name" value="$${outbound_caller_name}"/>
      <variable name="outbound_caller_id_number" value="$${outbound_caller_id}"/>
      <variable name="callgroup" value="techsupport"/>
    </variables>
  </user>
</include>
root@DockStar:/etc/freeswitch/directory/default#

It seems I should be able to point the X-Lite client at the Freeswitch IP
Maybe I'm missing a port number or something?

Most guides don't seem to require more.
http://www.linux-magazine.com/w3/iss...Freeswitch.pdf

**usa2k** · 07-22-2010 02:53 AM

Ext. 1001 is working

http://www.dslreports.com/forum/r245...kStar-for-2499

Now .... test extension to extension, then think about trying the BYOD registration.