roehrle
03-01-2009, 01:41 PM
If I am on port 2 in my computer room and I answer the phone but it is for my wife down in the rec room, can I transfer the call on line 2 to line 1 ???
sr98user
03-01-2009, 02:10 PM
I have not tried it. But the HT502 manuals says the following (you can call your own number and transfer)
Call Transfer
Blind Transfer
Assume that call Caller A and B are in conversation. A wants to Blind Transfer B to C:
3. Caller A presses FLASH on the analog phone to hear the dial tone.
4. Caller A dials *87 then dials caller C’s number, and then # (or wait for 4 seconds)
5. Caller A will hear the confirm tone. Then, A can hang up.
NOTE: “Enable Call Feature” must be set to “Yes” in web configuration page.
Attended Transfer
Assume that Caller A and B are in conversation. Caller A wants to Attend Transfer B to C:
1. Caller A presses FLASH on the analog phone for dial tone.
2. Caller A then dials Caller C’s number followed by # (or wait for 4 seconds).
3. If Caller C answers the call, Caller A and Caller C are in conversation. Then A can hang up to
complete transfer.
4. If Caller C does not answer the call, Caller A can press “flash” to resume call with Caller B.
NOTE: When Attended Transfer fails and A hangs up, the HT502 will ring back user A to remind A that B
is still on the call. A can pick up the phone to resume conversation with B.