Unable to access the browser-based web interface

[walletless]

I have a RT31P2 that I received from Voipo. My home network is set as such:

Cable Modem -> Router -> Voipo
All other machines on the network are connected to the router

Voipo ATA has the ip address 192.168.1.5. However, when I open a web browser and type in http://192.168.1.5, I cannot access the web interface. Is there a "trick" to show up? If I connect the laptop to the ATA, I can browse fine.. but I would rather like to connect through the router.

[tylerscell1]

try 192.168.15.1 i think that is it :)

[TomP]

Try 192.168.1.5:9999 instead. I seem to recall that you need to specify that port when accessing from the WAN side of the ATA (which is what you're doing from other computers behind your router).

[fisamo]

If you connect through the ATA's LAN, does it indicate whether 'remote management' is enabled? If so, does it specify a port? Usually, it's NOT port 80... If 9999, the URL posted by TomP would work.

[tylerscell1]

try 192.168.15.1 i think that is it :) guess i was wrong

[fisamo]

guess i was wrong
You were absolutely correct, but only when the PC is in the LAN of the RT31P2. :)

[walletless]

Try 192.168.1.5:9999 instead. I seem to recall that you need to specify that port when accessing from the WAN side of the ATA (which is what you're doing from other computers behind your router).

Thanks TomP, that worked!! :)

[chpalmer]

Try http://192.168.1.5:8080 from your regular network. Webadmin was enabled on mine from the start...