PDA

View Full Version : cisco 79XX issue, new config, all good but no inbound



peet
07-12-2010, 04:41 PM
I had this working earlier and it stopped. No idea which of the millions of config options I screwed up so a bit of a hint would be very welcome. I register with the server just fine, I am able to dial out, but can't dial back in. When I do call back in, a DEBUG SIP-MESS.. shows this: (what looks odd to me is that sometimes the URI shows 16... sometimes just 6.... I left the numbers identifiable while masking so you can see what I mean). Please help!



SIP Phone> [05:50:23:7178] SIPProcessUDPMessage: recv UDP message from <67.228.77.18>:<50195>, length=<1164>, message=
[05:50:23:7179] INVITE sip:6XXXXXXX22@10.254.1.107:5060;transport=udp SIP/2.0
Record-Route: <sip:67.228.77.18;lr=on;ftag=a9d5ed0-13c4-4c3b98d0-a5767df3-54c4e6c4>
Record-Route: <sip:67.228.177.9;lr=on;ftag=a9d5ed0-13c4-4c3b98d0-a5767df3-54c4e6c4>
f: "Cell Phone IL" <sip:6XXXXXXX44@208.94.157.10>;tag=a9d5ed0-13c4-4c3b98d0-a5767df3-54c4e6c4
t: <sip:16XXXXXXX22@67.228.177.9:5060>
i: CXC-275-7444d9f0-a9d5ed0-13c4-4c3b98d0-a5767df3-4c194956@208.94.157.10
CSeq: 1 INVITE
Via: SIP/2.0/UDP 67.228.77.18;branch=z9hG4bKbc76.40727c4.2
Via: SIP/2.0/UDP 67.228.177.9;rport=5060;branch=z9hG4bKbc76.c720f70 3.0
Via: SIP/2.0/UDP 208.94.157.10:5060;rport=5060;received=208.94.157. 10;branch=z9hG4bK-d1eb7-4c3b98d0-a5767df3-55be29ad
Max-Forwards: 68
m: <sip:16XXXXXXX44@208.94.157.10:5060;transport=udp>
Min-SE: 900
Session-Expires: 1800
c: application/sdp
Content-Length: 238
P-Asserted-Identity: "Cell Phone IL" <sip:6XXXXXXX44@pstn>

v=0
o=Acme_UAS 0 1 IN IP4 208.94.157.10
s=SIP Media Capabilities
c=IN IP4 208.94.157.10
t=0 0
m=audio 21190 RTP/AVP 0 18 101
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=rtpmap:101 telephone-event/8000
a=maxptime:20
a=sendrecv
[05:50:23:7184] Unknown address in Request URI
[05:50:23:7185] sipSPICheckRequest: Request URI Not Found
[05:50:23:7185] SIPTaskProcessSIPMessage: Error: sipSPICheckRequest() returned error.
[05:50:23:7187] sipRelDevCoupledMessageStore: Storing for reTx (cseq=1, method=INVITE, to_tag=<>)
[05:50:23:7189] sipTransportSendMessage: Opened a one-time UDP send channel to server <67.228.77.18>:<5060>, handle = 8 local port= 5060
[05:50:23:7189] sipTransportSendMessage:Sent SIP message to <67.228.77.18>:<5060>, handle=<8>, length=<521>, message=
[05:50:23:7190] SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 67.228.77.18;branch=z9hG4bKbc76.40727c4.2,SIP/2.0/UDP 67.228.177.9;rport=5060;branch=z9hG4bKbc76.c720f70 3.0,SIP/2.0/UDP 208.94.157.10:5060;rport=5060;received=208.94.157. 10;branch=z9hG4bK-d1eb7-4c3b98d0-a5767df3-55be29ad
From: "Cell Phone IL" <sip:6XXXXXXX44@208.94.157.10>;tag=a9d5ed0-13c4-4c3b98d0-a5767df3-54c4e6c4
To: <sip:16XXXXXXX22@67.228.177.9:5060>
Call-ID: CXC-275-7444d9f0-a9d5ed0-13c4-4c3b98d0-a5767df3-4c194956@208.94.157.10
CSeq: 1 INVITE
Content-Length: 0

[05:50:23:7191] sipTransportSendMessage: Closed a one-time UDP send channel handle = 8
[05:50:23:7195] SIPProcessUDPMessage: recv UDP message from <67.228.77.18>:<50195>, length=<451>, message=
[05:50:23:7195] ACK sip:6XXXXXXX22@10.254.1.107:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 67.228.77.18;branch=z9hG4bKbc76.40727c4.2
From: "Cell Phone IL" <sip:16XXXXXXX44@208.94.157.10:5060>;tag=a9d5ed0-13c4-4c3b98d0-a5767df3-54c4e6c4
Call-ID: CXC-275-7444d9f0-a9d5ed0-13c4-4c3b98d0-a5767df3-4c194956@208.94.157.10
To: <sip:16XXXXXXX22@67.228.177.9:5060>
CSeq: 1 ACK
Max-Forwards: 70
User-Agent: Kamailio (1.4.3-notls (x86_64/linux))
Content-Length: 0

man
09-09-2010, 03:37 AM
Are you using a 7970 or a 7960/40?

If it's a 7960/7940 the following thread talks about similar issue and may help.
http://forums.voipo.com/showthread.php?t=1875&highlight=cisco

7970 is a completely different firmware/config. I haven't touched mine yet.
If my polycom died, I might ;-)