Is is possible to change the name that shows up on outbound caller ID?
Printable View
Is is possible to change the name that shows up on outbound caller ID?
Would make a nice control panel option. Of course I can see it being abused too. HMM...Quote:
Originally Posted by brhalltx
Not if it needed manual approval and/or was only allowed to change once each month. And maybe a max of 6 times a year.
That would work just fine.Quote:
Originally Posted by usa2k
That is a lot of manual approval'sQuote:
Originally Posted by brhalltx
On DSLReports we can have 20 Avatars. Each new uploaded Avatar needs approval by a moderator.Quote:
Originally Posted by Xponder1
RIGHT NOW ON DSLR: 22144054 posts. 281 boards. 529 online, 634 guests
DSLR seems to handle it fine. I think their membership is over 1 Million.
When I was with VT you could have the outgoing CID changed for a nominal fee ($1.99 or something like that). Mine went from Ptrowski,Doh to "The Ptrowskis".
I doubt you will ever see this feature. There's too much potiential for abuse without it being closely monitored. Everything from profanity to offensive language would be left wide open for abuse. I'm sure Voipo would not like to be in the position of legal liability. I suppose this could be supported on a very infrequent basis, but only by opening a support ticket.
That is a joke. I can not believe people would pay for something like that It would not take what a small part of the day and a post on the forums to create a profanity database? Wordpress has that function built in it already you just have to add the profane words.Quote:
Originally Posted by usa2k
I would be more worried about people using names like Bank of America
As I recall, Packet8 allows it from their CP. Not a big deal to me though.
I see that there are new (to me, anyway) options in VPanel under Features/Preferences/ATA: "Display Name Line 1" and "Display Name Line 2." Support says they're for changing the caller ID name on numbers supplied by VoIPo... Doesn't seem to have any effect for me (on a number supplied by VoIPo), in the short term (15 minutes after setting these, it made no difference), anyway.
Very cool, we talk, they listen, and then some :)
Not sure how long it would take for the name to propagate. Especially if the phone with CNAM uses a different LIDB service?Quote:
Originally Posted by brhalltx
I really didn't expect it to be instantaneous; I suppose it could take days...Quote:
Originally Posted by usa2k
http://forums.voipo.com/showthread.php?t=1403Quote:
Originally Posted by brhalltx
1-2 weeks
http://www.dslreports.com/forum/r223...cement-to-test
Calling cloned line to cloned line, did not show my changes.
(Even though the name field is only VOIPo to VOIPo.)
I logged in today and for some odd reason the feature "block caller id" was enabled-strict.
I do not recall seeing a strict option before and I never set that. So I think when it was added it defaulted to enabled-strict. I would recommend at least a few of you check yours.
I noticed that too, and turned it off as a guess. That could have been my problem with calls to Vonage not going through...Quote:
Originally Posted by Xponder1
I submitted a ticket. If we both had the issue then support needs to be aware of it.Quote:
Originally Posted by brhalltx
EDIT- Noticed audio gain defaulted to low too. Support is looking in to it.
What's the difference between "Enabled" and "Enabled - strict"?
I wondered the same thing.Quote:
Originally Posted by Russell
I just turned mine off too.
I looked under Features>Preferences>Advanced>ATA Preferences, but I cannot find anything like the above. All I have is:Quote:
Originally Posted by brhalltx
- Audio
- Stun (whatever that is)
- Volume level
- Volume amplification
- DTMF method
Am I missing something?
I think it was removed as I don't see it either.
The Display Name was removed because it was causing too much confusion. It wasn't clear what it was for and ssers thought it was to set the name that will show up on Caller ID on outbound calls. That was only the case for calls within the VOIPo network.
We can't transmit a name out to show up on Caller ID outside of our network. In most areas, we can store a name in the Caller ID databases that providers use to look it up, but we can't send a name with it.
Right now the internal VOIPo network calls will show First and Last name for the account and support can change it if needed.
As for the Caller ID name when calling other networks, you can contact support to have that stored in the name database. We're able to do this for most accounts, but it does depend on your area.
It's just confusing and caused a lot of support questions, so we opted to remove it.
Tim, can you define the 'internal network' ? Because my Express line has never shown my name when calling my Residential line. Aside from the OB CNAM issues I'm having.