Printable View
Is there some way for me to setup X-lite so it does not use 5060 as it's local SIP port. You could argue it shouldn't make a difference that my PAP2T is on 5060 and 5061 since it's a different device - but, anyway, I'd like to change it. I've looked through the various menus and can't seem to find where. I'm running version 3.0. I've googled and found a reference from 2005 about how to do it but don't see that option available to me - perhaps they've removed it in my 3.0 version :-(.
You can specify that in the Topology tab. The field is "Manually specify range". Use the same port number in the two fields.
Right click on X-Lite
Choose SIP Account Settings
Choose Properties for the VOIPO entry you've already set up
On the main Account tab that you're presented with, in the DOMAIN attribute box, add :50xx to the end of the entry.
So, mine reads as follows:
east01.voipwelcome.com:5079
When you fire X-Lite, then go to vPanel, it will show as a device on Port 5079
It wants me to specify a range - if I type in 5062 in both fields it displays an error dialog and says the starting port must be less than the ending port (or some such words) :-(.Quote:
Originally Posted by sr98user
Wouldn't east01.voipwelcome.com:5079 specify the port to be used on the server side? I'm interested in specifying a different port from the default 5060 on the client side. Or, am I just confused?Quote:
Originally Posted by dbmaven
Make sure you check with support and find out which server to use.Quote:
Originally Posted by Russell
Unfortunately, for this poor sap, the only way to find out is to check with support :-(.Quote:
Originally Posted by Xponder1
For those of you using 3.0 of X-Lite. Can you add a second sip provider? My Add button is disabled - I figured this being the free version they just allow one.
My bad. I think I used 6061 and 6062 in the two field. It will select the first one.Quote:
Originally Posted by Russell
See also http://forums.voipo.com/showthread.php?t=1334&page=2
If you can see the NAT entries of the your router, then you can find out your server.Quote:
Originally Posted by Russell
I tried to do that and it didn't allow me. I think the free version allows only one.Quote:
Originally Posted by Russell
I thought so too. I assumed it worked for dbmaven. I just tried that and it definitely uses the 5079 on the server side and not the client site. Here is my NAT entry if I use east01.voipwelcome.com:5079 and vPanel confirms it.Quote:
Originally Posted by Russell
udp x.x.x.x:30056 x.x.x.x:30056 208.43.97.218:5079 208.43.97.218:5079
VOIPo is accepting SIP connection from more than 5060 port. Setting the ports in the Topology section make the local port change for me.. I set it to 6061 and 6062
udp x.x.x.x:6060 x.x.x.x:6060 208.43.97.218:5079 208.43.97.218:5079
Thanks for clarifying things for me, sr98user. Btw, if you ever want to try a nifty softphone you can try http://www.zoiper.com/zoiper.php. Get the 2.0 (which I've tried with excellent results) and not the communicator (never tried).
I just looked and from what I see X-Lite has more features.Quote:
Originally Posted by Russell
You're probably right. I like it because it supports multiple providers, which X-Lite does not.Quote:
Originally Posted by Xponder1
Ya I noticed that too. Until someone mentioned it the other day I had never tried multiple providers.Quote:
Originally Posted by Russell