Printable View
Call main number from cell. Hear distinctive ring. Call virtual number from the same cell, don't hear distinctive ring. For the calls in my incoming log at 8:06 and 8:07, if you need details. I can open a ticket if the feeling is that it's specific to my number. I'm on east01.
Opened ticket. Brandon fixed it.
That sounded like a feature to tell them apart!
:-). Actually, that feature will be arriving soon.Quote:
Originally Posted by usa2k
Hey guys -- check out "Features" -> "Virtual Numbers" -- please do let me know if you see / experience any issues. Thanks!
Very Cool!! ;)
Agreed! Brandon, do I take it that any distinctive ring in place will override the ring tone for the virtual number? At least that's what my simple test shows. Thanks a bunch!Quote:
Originally Posted by chpalmer
That is correct, if you do have a distinctive ring tone setup for a virtual number, regardless of the Caller (it will ring that ring tone); otherwise it'll ring the ring tone of the Caller (if one is setup) and if all else fails, will default to normal ring.Quote:
Originally Posted by Russell
Brandon,Quote:
Originally Posted by VOIPoBrandon
This ddoesn't seem to be working for me. I set my virtual number to use distinctive ring 4 and saved the settings, but the ring remains the same, one long ring which is the normal one. Ring 4 I believe should be 1 short, one long and one short.
I even power cycled the pap2 just in case this was required.
Am I not doing this correctly?
RA
It doesn't work for me either with the HT-502. With ring tone 1 set up in Vpanel and the 502.
At this point, we only officially support the Linksys PAP2 and have replaced virtually all HT502s in service. If you still have a VOIPo-issued one and need to get it replaced, let us know.Quote:
Originally Posted by voipinit
This feature and any new ones that are device dependent will be specific to the PAP2.
With this feature as an example, we modify the headers being sent to tell the device to use the selected ring.
Hey guys -- I do apologize, apparently the updates specific to this did not get pushed out to all production servers, this should now be resolved, as before please advise us of any issues you may be experiencing, thanks!
Just for the record, this is now working like a champ here on my virtual number. Thanks.
RA
Anyone try #10. I thought once upon a time it would produce an almost constant ring. When tried yesterday it was (to my ears) no different than 1. Anyone, hear anything different with #10? Or, can confirm that it's the same as #1 for them too?
I personally have not tried all of the possible rings, but I think this is one area that needs some work to make it a little easier to use. Currently, the only way to know the cadence of the chosen ring is trial and error. It would be great if somoen could simply record some .wav files of what each ring sounds like and add a play button to hear the sound of the slected ring.
Good idea. It could be one wave. Say the ring number, then a sample, and cycle through the list.