Re: PBX BETA Testing (Will be Available for Resellers)
Re: PBX BETA Testing (Will be Available for Resellers)
Quote:
Originally Posted by
chevyman
TIM
Any News on custom music on hold?
This is a major selling point, as company's like there own type of music, and others like music with voice over service info.
Thanks!
Anything going on with this???
Re: PBX BETA Testing (Will be Available for Resellers)
Quote:
Originally Posted by
chevyman
Two IVR problems:
1) "Repeat Audio (Invalid / No Response)" doesn't work. i checked it but when i go back into it, it is unchecked. Also when i call with 'no response or invalid' it just times out to a busy signal.
2) "Timeout Extension" doesn't work it just times out to a busy signal.
What browser are you using? I've noticed that a lot of the buttons are unresponsive if I use MSIE. Settings don't save, trunks won't register/unregister, etc.
Chrome seems to work fine though.
Re: PBX BETA Testing (Will be Available for Resellers)
Quote:
Originally Posted by
chevyman
Anything going on with this???
Right now we're working through all the submissions we have and prioritizing bugs/issues before additions, but it's definitely on the list.
Re: PBX BETA Testing (Will be Available for Resellers)
Quote:
Originally Posted by
GreenLantern
What browser are you using? I've noticed that a lot of the buttons are unresponsive if I use MSIE. Settings don't save, trunks won't register/unregister, etc.
Chrome seems to work fine though.
i'm using Firefox tried chrome it shows the timeout ext. but doesn't timeout to that ext, just goes to busy signal, have did a trouble ticket on it.
Re: PBX BETA Testing (Will be Available for Resellers)
Not sure if this is a bug, but I found some unusual behavior that I thought I'd report.
If you set some of the forwarding conditions (busy, unavailable, failover) to go to the SIP extension's voicemail extension, it doesn't seem to work as expected.
What happens is, the SIP extension rings until timeout (20 secs for example), then pauses and begins ringing again, without going to voicemail.
Setting those forwarding conditions back to default allows calls to go to voicemail as expected again.
I haven't gone through and tested all the different possibilities for different combinations. So I don't know if busy, unavailable AND failover all cause this, or if it is just a particular one.
Re: PBX BETA Testing (Will be Available for Resellers)
Quote:
Originally Posted by
GreenLantern
Not sure if this is a bug, but I found some unusual behavior that I thought I'd report.
If you set some of the forwarding conditions (busy, unavailable, failover) to go to the SIP extension's voicemail extension, it doesn't seem to work as expected.
What happens is, the SIP extension rings until timeout (20 secs for example), then pauses and begins ringing again, without going to voicemail.
Setting those forwarding conditions back to default allows calls to go to voicemail as expected again.
I haven't gone through and tested all the different possibilities for different combinations. So I don't know if busy, unavailable AND failover all cause this, or if it is just a particular one.
Please open a ticket on this with as much detail as you can and we'll look into it.
Re: PBX BETA Testing (Will be Available for Resellers)
Just for you guys to have a little laugh ;)
http://youtu.be/0PzQdycgAfc
Re: PBX BETA Testing (Will be Available for Resellers)
Here is a quick bit of documentation for special dial prefixes available to you.
Dynamic Groups
-----
Dynamic group extension where members can join the group and leave the group by dialing pre-defined access codes.
i.e. *JOIN2000 *5646 2000
i.e. *EXIT2000 *3948 2000
Voicemail
-----
Check voicemail
i.e. *MAIL2000 *6245 2000
Alternatively you can check voicemail by dialing the voicemail extension directly, i.e. 2000 from your SIP phone connected to your PBX and immediately hitting zero.
Audio
-----
Playback and Record audio special extensions
i.e. *PLAY2000 *7529 2000
i.e. *RECO2000 *7326 2000
Re: PBX BETA Testing (Will be Available for Resellers)
For everyone using the PBX check out this post... http://forums.voipo.com/showthread.p...n-for-November I have been using Bria now for about two weeks with it