Something stuck? No Vpanel or inbound calls

[burris]

My sip ports are

port1=5079

port2=5062

Been this way all along with no problems till yesterday's registration dropping out..

[scott2020]

On some of my calls I am getting horrible static. I know it is digital, but it sounds like back in POTS days when water was in the line or a wire was loose. I just called my DID and I couldn't even make out the voice.

Edit: It happens on the ring-in, so when you call my DID you can hear the "static" even before someone answers.

Edit 2: It doesn't happen every time. Sometimes it is inbound and sometimes outbound. Kind of strange.

[Vumes]

Local Sip port for FXS2 showed 5062. FXS1 shows 5079. Should I change them both?

[VOIPoTim]

Local Sip port for FXS2 showed 5062. FXS1 shows 5079. Should I change them both?

Nope, they should be different ports for the different lines.

Try it now though, we just enabled both ports on our end so they should work.

[VOIPoTim]

So far so good. Anyone else wanting to help test this...here is the info:

----
1) Login to ATA with admin password. Temporary: Ajw5q1FexW8u8XuL

2) Disable provisioning temporarily by removing the Config Server Path under Advanced Settings.

3) Under FSX Port 1, change your server to central02.voipwelcome.com

4) Under FSX Port 2, change your server to central02.voipwelcome.com AND add a B to the end of your username/auth username. Example: 2816172000 would change to 2816172000B

5) Reboot and see if you can find any issues.


After Testing/Reverting to Normal:

If you need to revert, just re-enable provisioning by changing Config Server Path back to provision.dev.voipo.com and rebooting. It should reconfigure as it was before.
----

[VOIPoTim]

What is everyone seeing so far?

There are dozens of you on it, so hopefully the bulk of you being quiet is a good thing

[Vumes]

Tim, on FXS2 should my proxy server be central02 as well, or leave it as sip, or blank?

[VOIPoTim]

Tim, on FXS2 should my proxy server be central02 as well, or leave it as sip, or blank?

Should be central02.

[VOIPoBrandon]

Tim, on FXS2 should my proxy server be central02 as well, or leave it as sip, or blank?

central02.voipwelcome.com

ah Tim beat me to it .
________
Geo/chevrolet tracker

[scott2020]

Everything looks OK except for the horrible static on my incoming calls. Maybe it is something with my DID or something.