Something stuck? No Vpanel or inbound calls

**Vumes** · 01-28-2009 08:30 PM

I cannot get FXS2 to register at all. I've tried rebooting several times and nothing...

Also, outbound seems to be fine, but upon answering on an inbound call gets a fast busy and the calling party gets voicemail.

**VOIPoTim** · 01-28-2009 08:35 PM

Originally Posted by Vumes

I cannot get FXS2 to register at all. I've tried rebooting several times and nothing...

Also, outbound seems to be fine, but upon answering on an inbound call gets a fast busy and the calling party gets voicemail.

Make sure for it, you're setting to to central02.voipwelcome.com and changing the username to 1112223333B (with your own phone number).

2816172000 would go to 2816172000B on FSX2.

**Vumes** · 01-28-2009 08:36 PM

Originally Posted by VOIPoTim

Make sure for it, you're setting to to central02.voipwelcome.com and changing the username to 1112223333B (with your own phone number).

2816172000 would go to 2816172000B on FSX2.

Yup, thats how it looks.

**VOIPoTim** · 01-28-2009 08:39 PM

Originally Posted by Vumes

Yup, thats how it looks.

What port is it set to? Maybe yours was changed by support? If so, change its sip port to 5060.

**burris** · 01-28-2009 08:52 PM

My sip ports are

port1=5079

port2=5062

Been this way all along with no problems till yesterday's registration dropping out..

**myvoip07** · 01-28-2009 08:57 PM

Originally Posted by burris

My sip ports are

port1=5079

port2=5062

Been this way all along with no problems till yesterday's registration dropping out..

Those are the default Local sip port settings for HT502 provisioned by VoiPo. I got mined changed to the HT502 factory default per below

Port1=5060
Port2=5062

**burris** · 01-28-2009 08:59 PM

Originally Posted by myvoip07

Those are the default Local sip port settings for HT502 provisioned by VoiPo. I got mined changed to the HT502 factory default per below

Port1=5060
Port2=5062

I've had my ports changed in the past and so long as they weren't the same, they worked

**scott2020** · 01-28-2009 08:40 PM

On some of my calls I am getting horrible static. I know it is digital, but it sounds like back in POTS days when water was in the line or a wire was loose. I just called my DID and I couldn't even make out the voice.

Edit: It happens on the ring-in, so when you call my DID you can hear the "static" even before someone answers.

Edit 2: It doesn't happen every time. Sometimes it is inbound and sometimes outbound. Kind of strange.