Something stuck? No Vpanel or inbound calls

[VOIPoTim]

To elaborate on what I'm saying with some isolated issues....

Some devices are apparently still sending the Line 2 registration before Line 1 which is canceling Line 1 out when it periodically re-registers. We're going to go ahead and roll out the new 2 Line method this weekend, but can make that change now for anyone having issues.

With the new clone line setup, the 2nd line will be using separate SIP credentials and registering independently so the two can never affect each other. That way even if for some odd reason, the ATA sends both at the same time or out of order, it won't matter. The old firmware consistently sent them in order...the new seems to only do that sometimes.

We've only seen a few reports of this so far and from logs it's not affecting many, but like I said we're going to roll out the new 2 line method anyway to prevent it for those it is affecting (and just not reporting it).

[buckethead]

I am still running on the "test" set up from the other night with nothing in provision path and on central02 for both lines with B in the 2nd. I had some audio problems yesterday and opened a ticket. Through the ticket was asked to put back in provisioning server so it could grab a new sip server to see if that would resolve audio issues. As soon as I entered back in provisioning server and rebooted my device would not hold registration just like the other day - also it would not even grab new firmware as I am still on .8.

In order to keep my service up and going I put back in the "test" test up from the other night and I am now good to go. Audio issues seemed to clear itself up as wife has been on the phone a times tonight with no problems or complaints.

Assuming at some point I am going to need to do something to get up to .21 firmware and correct configuration?