PAP2T Configuration for BYOD

[nhawk]

A couple of updates for BYOD users:

1) Dial Plan that works a bit better (makes * codes work with or w/o delay):
(*123S0 | 123S0 | 011[2-9]x.S5 | 1[2-9]xx[2-9]xxxxxxS0 | [2-9]xx[2-9]xxxxxxS0 | [2-9]xxxxxxS1 | [2-9]11S0 | *2[058][2-9]xx[2-9]xxxxxxS0 | *xx | xx.)

2) To allow VOiPo specific codes listed below to work
http://forums.voipo.com/showthread.php?t=1477
add "*20 *21 *22 *23 *24 *25 *26 *27 *28" (no quotes) to "Feature Dial Services Codes:" under Regional tab and change
Block CID Act Code: *30
Block CID Deact Code: *31
Block CID Per Call Act Code: *67
Block CID Per Call Deact Code: *68

3) FXS Port Input/Output Gain: -3 (works best for me)

4) Under Line1/2 some * codes should be changed to "No" since they don't have the desired effect, but I'm trying to figure out exactly which ones can be changed to "No" at this time... If you have something to add/update, please reply here.
So far I think these should be changed to No:
Cfwd All Serv
Secure Call Serv
Block ANC Serv (CID blocked calls come as "Unknown" so enabling it doesn't do anything)
Speed Dial Serv (unless it's used, which I think will need x. in the Dial Plan)