Feature Request Thread

[caseydoug]

Is 'no answer call forwarding' and 'busy call forwarding' features that may be added in the future? With a teenageer in the house the busy call forwarding to my second line would be most helpful..

I just noticed that the PAP2 has user settings for "busy" and "no answer" forwarding. Are these user settings overwritten when the adapter gets provisioned?

Edit: So I tried implementing Do Not Disturb using the PAP2 interface, and it does work. I also rebooted the adapter, and the setting survived. Assuming the adapter is provisioned with each reboot, and that other user settings work the same way as DND, it looks like it is possible to implement a few of the requested features via the adapter.

Having said that, I should note that changing the setting did not change what shows up in vPanel, so this could easily cause a conflict between vPanel and the adapter. Also, both Line 1 and Line 2 must be set in the adapter because of the cloned line. As a practical matter, it's probably better to wait until these features are implemented by VOIPo, but it certainly looks like it is doable.

Edit #2: This did NOT work for call forwarding. Perhaps it worked for DND only in that it went to voicemail as a result of a failover. Back to the drawing boards!