Alternate Device Testing

**burris** · 07-17-2009 01:01 PM

A few quick test results...

Since I have a router, I hooked it up just like the PAP2....

Both lines dial out OK.

Cannot call one cloned line to the other. Goes to failover.

The first inbound try rang only to line 1...since that call....
When calling in from cell...rings once and voice quickly answers "no messages" and disconnects.

Since I can't get into the config, I don't know how it is set up or what might be causing these issues..

I have to take it off line now since I get no incoming.

Might be handy to assign a temp DID so we can leave it on all the time and test over a period of time..

**VOIPoTim** · 07-17-2009 01:16 PM

Originally Posted by burris

A few quick test results...

Since I have a router, I hooked it up just like the PAP2....

Both lines dial out OK.

Cannot call one cloned line to the other. Goes to failover.

The first inbound try rang only to line 1...since that call....
When calling in from cell...rings once and voice quickly answers "no messages" and disconnects.

Since I can't get into the config, I don't know how it is set up or what might be causing these issues..

I have to take it off line now since I get no incoming.

Might be handy to assign a temp DID so we can leave it on all the time and test over a period of time..

Ok, just hang tight and by Monday we'll post a new thread with the formal testing info and how we're handling things.

**Xponder1** · 07-17-2009 03:07 PM

Got mine today too.
I also connected it and I can make outgoing calls on both lines but can not get a incoming call at all.

I will keep a lookout for the thread you mentioned Tim. I would imagine you all probably already know why we cant call out.

**dvijen** · 07-17-2009 04:40 PM

got it today, will wait for the instructions
thanks
dvijen

**chpalmer** · 07-18-2009 11:50 AM

plugged into the cable modem direct. have internet connectivity through it. line registered last night. no registration this morning...

standard user - password does not work. (admin - admin).

>edit to add Ive gone back to the pap2 for the day...

**Russell** · 07-18-2009 02:31 PM

Nothing in my mailbox :-( :-( :-(.

**gbh2o** · 07-18-2009 06:27 PM

Originally Posted by Russell

Nothing in my mailbox :-( :-( :-(.

sniff, sniff . Nothing new in mine either.

**Russell** · 07-24-2009 09:18 PM

Originally Posted by Xponder1

Got mine today too.
I also connected it and I can make outgoing calls on both lines but can not get a incoming call at all.

Ditto.

I was going to replace the PAP2T with the newly arrived RT31P2, but not being able to get incoming killed that idea. Xponder1, do you now having incoming? If yes, what did you do to start getting incoming?

**Xponder1** · 07-24-2009 09:27 PM

Originally Posted by Russell

Ditto.

I was going to replace the PAP2T with the newly arrived RT31P2, but not being able to get incoming killed that idea. Xponder1, do you now having incoming? If yes, what did you do to start getting incoming?

I have not reconnected it. I am just going to wait till they ask us to hook them up.

**Russell** · 07-25-2009 06:22 AM

Originally Posted by Xponder1

I have not reconnected it. I am just going to wait till they ask us to hook them up.

I've left it connected to the Internet, with a spare phone connected to Line 2 of the new device. I'm also letting it to DHCP to my main computer - a personal RT31P2 I have reboots on a regular basis and I'm curious if this will exhibit any similar symptoms.

Edit: a 4-line phone now connected to both devices (standard issue and alternate) which are online. Please let me know if doing any of this is going to impact my ability to receive incoming on my regular ATA.