Upcoming Features/Enhancements

[Xponder1]

*28 will work if you meet the following criteria:

A) You are provisioned using VOIPo's default dial plan.
B) You dial *28 (7,10,11) digit dialing
C) As Usa2k pointed out it'll also ideally work when dialing *28411, or even a custom call route, however this is one of the reasons it is still in BETA.

Also please ensure you are dialing the complete number without any pause, i.e. *288005558355.

I've noticed with a couple of people that have said it is not working, yet they are receiving a busy signal that their network traces are simply showing *28 as the destination for their call, which most likely means they are dialing too slow, or need the time increased to dial these phone numbers.

Please take this information into evidence and then further let us know if you are have any continual issues.

Why not add *28 like you did *67 so it gives you the second high pitch dial tone. Just a thought.

[VOIPoTim]

Why not add *28 like you did *67 so it gives you the second high pitch dial tone. Just a thought.

I think that's generated from the PAP2 since it has *67 functionality in it.

[Xponder1]

I think that's generated from the PAP2 since it has *67 functionality in it.

Tim as I recall the pap2 has a setting that you can put that in all the *codes you want and when you enter a *code listed it gives a higher pitch dial tone and allows you to dial the number. Then it sends the entire line *679994445555 all at once. I will see if I can find the thread where Brandon tested it and found it works.

Edit
Here it is
http://forums.voipo.com/showthread.php?t=1469&page=3
Look at the last page of responses.