PAP2T vs RT31P2

[voip123]

Great info.

Question about hooking the RT31P2 with another router (WRT54G running Tomato) in front of it.

With VoicePulse, I had a PAP2T. Simply connect a LAN port on the WRT54G to the "Internet" port (the only Ether port on it), and it worked. It got an internal IP address on the same subnet as the WRT, and all was great.

With the RT31P2, do I need to connect the LAN port of the WRT54G to the WAN port of the RT31P2? Or can I get away with using the LAN port?

I greatly prefer the WRT54G being first in line since all wireless devices connect to it and I use it for QOS.

I did connect the RT31P2 via WAN port. I don't have a "line 1" light lit. And because it's on a different subnet, I can't access it without hardwiring a PC to it.

Thoughts?

Thanks,

-Craig

This is my setup:

DSL Modem -> Linsys WRT54GS wireless router -> VOIPo RT31P2 Adapter

Linsys WRT54GS = 192.168.1.1

VOIPo RT31P2 = 192.168.1.188, VOIPo suggested the IP should be outside the range of the WRT54GS.

I have 2 PCs connect to the RT31P2 , the IPs are: 192.168.15.100 and 192.168.15.101. Both of them are static. The default getway on RT31P2 is 192.168.15.1. You can leave the DHCP enable, it will handle the IP for you automatically.

Hope this helps.