Voipo to Voipo - Only gets to Voicemail

[usa2k]

It can be 1 digit even.
Don't add a "#" in the rule. Just know it speeds things up when dialing.
It indicates the string of numbers is complete.

In beta test of Reseller, there was no fix yet, but no universal issue of
VOIPo to VOIPo calls. I had some that would not ring the phone unless
using a sip number during tests. (Even to a different state.)

[rmwlaw]

It can be 1 digit even.
Don't add a "#" in the rule. Just know it speeds things up when dialing.
It indicates the string of numbers is complete.

In my previous reply to your assistance, I had asked:

"COULD you please explain exactly how I would go about configuring my voipo line to "Assign" a number to my wife's line?

I know how to set up inbound or outbound routing. But I do not see any option to assign a number such as 789 or to assign something like 789# to that phoneline's outbound route. Thanks."

I have indeed created an Outbound Route, but it uses the complete telephone number. I do not know how to assign a shortcut to it. Would you please, please, explain how to accomplish this. Perhaps you could list step by step what you do, so that I can double check my efforts, which were:

1. Log in.
2. Click on Features Tab.
3. Click on Call Routes Option.
4. Enter Wife's Voipo Telephone Number in Phone Number Box under Outbound Routes.
5. Select Forwarding in Call Route Options Box.
6. Click on Create.

Now what? I do not know what more to do in order to create that outbound route you had referenced in your initial response.

Thank you,

Richard in sunny (HOT) South Florida

[usa2k]

In Features under Routes, setup an Outbound Call Route to FORWARD to SIP

https://secure.voipo.com/features/call_routes

EDIT (I see):
Put 789 as the number,
chose Forward from the drop-down
Put the SIP address in that new field, then Create

Merely dial 789# to make the call.

Page 22 of the preliminary user's manual
(Can't seem to find the thread Tim posted the manual in.)
Here it is: http://forums.voipo.com/showpost.php...56&postcount=1