Results 1 to 4 of 4

Thread: Need Voipos Dialing Plan

  1. #1
    Join Date
    Jul 2014
    Posts
    4

    Default Need Voipos Dialing Plan

    Can some provide that dialing plan that VOIPO is using on SIP devises
    Thank's

  2. #2
    Join Date
    Oct 2013
    Posts
    18

    Default Re: Need Voipos Dialing Plan

    Quote Originally Posted by parsec View Post
    Can some provide that dialing plan that VOIPO is using on SIP devises [sic]
    Thank's
    You're kidding, right?

    VOIPO's "dial plan" would be the dial plan described here: http://en.wikipedia.org/wiki/Dial_plan

  3. #3
    Join Date
    Jun 2014
    Posts
    19

    Default Re: Need Voipos Dialing Plan

    Quote Originally Posted by parsec View Post
    Can some provide that dialing plan that VOIPO is using on SIP devises
    Thank's
    (*xx|1xxxxxxxxxx|<1NPA>[2-9]xxxxxx|<1>[2-9]xxxxxxxxx|011xx.S3|(Mipd)|[^*]@@.)

    NPA is your area code. This is what I use in an OBi ATA and will probably work in CISCO devices. Not sure about Grandstream ATAs.

  4. #4
    Join Date
    Jul 2010
    Posts
    358

    Default Re: Need Voipos Dialing Plan

    parsec, I think what you need is the dial plan pattern for your device. that will depend on your device, your calling area, and whether or not you're using a pbx versus standard phones (do you need 3 digit extension dial patterns, etc?)

    find the manual for your device, learn the syntax they use for building dial plans, and create or customize as needed.

    most likely there's a default dial plan (for your device) that should work fine. that would be specific to, and provided by the device maker, not by voipo.

    that said, voipo has a particular pattern they expect from your device, such as 7, 10 or 11 digits. so as long as your device passes those valid dial patterns, you should be good to go.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •