Hardware Update

[christcorp]

If you don't yet have it, here is the manual for it.

See if you can figure it out.

http://tinyurl.com/6n9nmq

Link doesn't work dude. But that's OK. It's probably similar to all other voip ata with built in routers. I plug it in, it grabs and IP address. I look at my regular router. It tells me the IP address it GAVE the voip adapter. I go to that IP address. It allows me into the configuration. I set up a static IP address on it. We probably don't have access to certain advanced features. Sound pretty typical to 99% of voip adapters in the world.

The only reason I asked was because the way some of the questions were being asked, it sounded like EVERYTHING was set up with DHCP and obtaining IP addresses automatically; that it was 100% plug and Pray and couldn't be changed. Sounds like a normal typical setup. later... mike....

[VOIPoTim]

Link doesn't work dude. But that's OK. It's probably similar to all other voip ata with built in routers. I plug it in, it grabs and IP address. I look at my regular router. It tells me the IP address it GAVE the voip adapter. I go to that IP address. It allows me into the configuration. I set up a static IP address on it. We probably don't have access to certain advanced features. Sound pretty typical to 99% of voip adapters in the world.

The only reason I asked was because the way some of the questions were being asked, it sounded like EVERYTHING was set up with DHCP and obtaining IP addresses automatically; that it was 100% plug and Pray and couldn't be changed. Sounds like a normal typical setup. later... mike....

You're actually able to login to the ATA to manage all the network settings yourself (static IPs, PPoE, etc). We don't provision that stuff.

By default it's all set to DHCP and a default 192.168.2.1 for it's lan port when used as a router.

Also can do port forwarding, dmz, etc...basic stuff, but it's there.

When you login though you can change that stuff.

[Brian]

What's the default password for this model?

[VOIPoTim]

What's the default password for this model?

Should be 123.

[burris]

Should be 123.

Hi, Tim....

123 does get me into the 502 static and basic screens, but when going to any other tabs, it keeps asking for a new password and nothing I have works.

Thanks....

burris

[voxabox]

Hi, Tim....

123 does get me into the 502 static and basic screens, but when going to any other tabs, it keeps asking for a new password and nothing I have works.

Thanks....

burris

"123" is the "user" password to the HT-502
"user" login allows LAN administrations, "administrator" login, other ATA/SIP administrations (which is under controlled/provisioned by the ITSP - i.e., VOIPo)

[burris]

"123" is the "user" password to the HT-502
"user" login allows LAN administrations, "administrator" login, other ATA/SIP administrations (which is under controlled/provisioned by the ITSP - i.e., VOIPo)

Strangely enough, the first time a few days ago that I tried it, I did have access. Then it only did as I described above.

My need is to set up both my lines in the ATA..

[Brian]

Strangely enough, the first time a few days ago that I tried it, I did have access. Then it only did as I described above.

My need is to set up both my lines in the ATA..

I believe Tim said the 502's will be able to support 2 VOIPo lines, but not be provisioned for any other services. VOIPo can provision your 2nd line from their service, if you have one.

[NY Tel Guy]

What's the default password for this model?

The password is: 123 for the first 2 tabs on the left
The 3 tabs to the right use password admin1

hope this helps.

[burris]

The password is: 123 for the first 2 tabs on the left
The 3 tabs to the right use password admin1

hope this helps.

Been there...done that, but I will try again before my next glass of wine..

Thanks....