Something stuck? No Vpanel or inbound calls

[Xponder1]

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.

As Brandon requested I tried a 1 800 number and it had the same issue and I called my cell XXX -XXXX and it had the problem. After reading your comment I tried dialing my cell with the area code and it worked fine.

[scott2020]

My static problem is pretty bad. I only can call from my cell phone. Other calls to other numbers from my cell are fine. It is static from the beginning of the ring in all the way to voicemail. Voicemail is all static as well. It is so loud I can't communicate. It seems to be only inbound calls right now. Also, my virtual number seems to be clear, so maybe it is something with my Level 3 DID here in MO.

[Xponder1]

I noticed port one has nothing in the outbound proxy field but port two has sip.voipwelcome.com

Does that matter?

[VOIPoTim]

I noticed port one has nothing in the outbound proxy field but port two has sip.voipwelcome.com

Does that matter?

Take out the sip.voipwelcome.com one.

[Xponder1]

Take out the sip.voipwelcome.com one.

Removed and rebooted same issue.

[VOIPoTim]

As Brandon requested I tried a 1 800 number and it had the same issue and I called my cell XXX -XXXX and it had the problem. After reading your comment I tried dialing my cell with the area code and it worked fine.

So this is only 7 digits and 800 number?

Is this only on line 2 and they work fine on line 1?

[Xponder1]

So this is only 7 digits and 800 number?

Is this only on line 2 and they work fine on line 1?

100% correct. Line 1 is fine.

[scott2020]

Same here. Port 1 I can dial 7 digits and the call works. Port 2 I cannot dial 7 digits but 11 digit dialing works.