Which dd-wrt bin file should I use, VOIP or STD?

[kbuck320]

The answer is .. it doesn't matter what version you use, if you are using a device like the PAP2.

The main addition in the "voip" version of dd-wrt is SIPatH, a SIP proxy.

http://www.dd-wrt.com/wiki/index.php...#File_Versions

In short, you can use any version of dd-wrt that suits you, your router, and other requirements. The voip version is not necessary. I use the mini version, myself.

[Xponder1]

The answer is .. it doesn't matter what version you use, if you are using a device like the PAP2.

The main addition in the "voip" version of dd-wrt is SIPatH, a SIP proxy.

http://www.dd-wrt.com/wiki/index.php...#File_Versions

In short, you can use any version of dd-wrt that suits you, your router, and other requirements. The voip version is not necessary. I use the mini version, myself.

True I use the micro version with no problems.

[Hawkmeister]

Thanks guys. I was mostly concerned about the VOIP vs STD. Sounds like VOIP version is not necessary. I'll be installing this upcoming weekend. I've got the router version with the large flash area, so I don't need the VINT micro or mini version. Wish me luck!