audio dropping after 15 minutes

[VOIPoTim]

So that we can confirm this is isolated to the PAP2s, can both of you PM me an address to send a Grandstream unit to?

We have a slew of problems like this with the Linksys devices when we were originally testing them and I think this can easily be resolved by swapping them out. There's just not really anything on our end with a timer like that so I'm pretty sure it's device related.

This way we can be sure to see if it resolves it or if it's a larger issue to look at.

-Tim

Did it to me two more times today, once on my call to 801-349-94XX and once on the call to 303-280-33XX. these are outgoing calls that I make, and the symptom is that I cannot hear the called party after 15 minutes of call duration -- they can hear me fine. I've got the VOIPO-provided PAP2 -- and don't have this problem with the other VOIP providers.

Is it happening only on some calls or all calls which are > 15mins?
I have also noticed that after 15mins it disconnects mine also.

Incoming seems to be fine, problems with outgoing some sort.

By the way i did a test with FWD-FWD and it was fine for more then 25min's

I did a incoming test for more then 20 min's and it worked fine. Here is what i did. From Grand Central webcall called my Ipkall# which is forward to my FWD# on 1st pap2 and GC# is forwarded to ring my voipo# on other pap2.

[myvoip07]

So that we can confirm this is isolated to the PAP2s, can both of you PM me an address to send a Grandstream unit to?

We have a slew of problems like this with the Linksys devices when we were originally testing them and I think this can easily be resolved by swapping them out. There's just not really anything on our end with a timer like that so I'm pretty sure it's device related.

This way we can be sure to see if it resolves it or if it's a larger issue to look at.

-Tim

PM with mailing address as requested..

[gbh2o]

So that we can confirm this is isolated to the PAP2s, can both of you PM me an address to send a Grandstream unit to?

We have a slew of problems like this with the Linksys devices when we were originally testing them and I think this can easily be resolved by swapping them out. There's just not really anything on our end with a timer like that so I'm pretty sure it's device related.

This way we can be sure to see if it resolves it or if it's a larger issue to look at.

-Tim

I thought this sounded familiar. It sounds like the same 15 minute problem I was reporting about having with the Zoom back 24Sep07! I was _not_ having it with the asterisk-based number, so it appeared related to equipment then.