Something stuck? No Vpanel or inbound calls

**Xponder1** · 01-28-2009 09:52 PM

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

**VOIPoBrandon** · 01-28-2009 09:58 PM

Originally Posted by Xponder1

Correction I set mine as directed to test it and port 2 just gives me a fast busy. Both say they registered.

So how do we know when to change the provisioning back?

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?
________
MONTANA MARIJUANA DISPENSARY

**Xponder1** · 01-28-2009 10:01 PM

Sent. Port 1 I tested in and out both for 2 mins and they were fine.

**Xponder1** · 01-28-2009 10:05 PM

Originally Posted by VOIPoBrandon

Could you PM me your phone number, if you want to check a few last settings to make sure it is alright, otherwise whenever you are ready to revert feel free.

Also, what action gives you fast busy? Incoming Call, outgoing Call? etc?

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

**VOIPoTim** · 01-28-2009 10:07 PM

Originally Posted by Xponder1

Outbound calls and inbound did not work to the second port.

I tested by calling my cell phone then using my wifes phone to call the house.

Was port 2 set to central02 too?

**Xponder1** · 01-28-2009 10:11 PM

Originally Posted by VOIPoTim

Was port 2 set to central02 too?

Yes I just checked and made sure.

**scott2020** · 01-28-2009 10:12 PM

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.

**Xponder1** · 01-28-2009 10:16 PM

Originally Posted by scott2020

I also get fast busy with outgoing calls on port 2.

EDIT: When I dial 11 digits it works. Dialing 7 digits on port 2 gives fast busy.

As Brandon requested I tried a 1 800 number and it had the same issue and I called my cell XXX -XXXX and it had the problem. After reading your comment I tried dialing my cell with the area code and it worked fine.