Alternate Device Testing

**burris** · 07-17-2009 12:28 PM

Originally Posted by VOIPoTim

Not yet.

Took a little longer than expected to prep them.

We plan to contact people by the end of next week.

Got the RT31P2 today...Waiting for instructions to proceed..

**VOIPoTim** · 07-17-2009 12:34 PM

Originally Posted by burris

Got the RT31P2 today...Waiting for instructions to proceed..

That was quick.

We'll e-mail out a list either today or Monday of things we'd like to have everyone test.

It should be plug and play right now though for normal use.

**burris** · 07-17-2009 01:01 PM

A few quick test results...

Since I have a router, I hooked it up just like the PAP2....

Both lines dial out OK.

Cannot call one cloned line to the other. Goes to failover.

The first inbound try rang only to line 1...since that call....
When calling in from cell...rings once and voice quickly answers "no messages" and disconnects.

Since I can't get into the config, I don't know how it is set up or what might be causing these issues..

I have to take it off line now since I get no incoming.

Might be handy to assign a temp DID so we can leave it on all the time and test over a period of time..

**VOIPoTim** · 07-17-2009 01:16 PM

Originally Posted by burris

A few quick test results...

Since I have a router, I hooked it up just like the PAP2....

Both lines dial out OK.

Cannot call one cloned line to the other. Goes to failover.

The first inbound try rang only to line 1...since that call....
When calling in from cell...rings once and voice quickly answers "no messages" and disconnects.

Since I can't get into the config, I don't know how it is set up or what might be causing these issues..

I have to take it off line now since I get no incoming.

Might be handy to assign a temp DID so we can leave it on all the time and test over a period of time..

Ok, just hang tight and by Monday we'll post a new thread with the formal testing info and how we're handling things.

**Xponder1** · 07-17-2009 03:07 PM

Got mine today too.
I also connected it and I can make outgoing calls on both lines but can not get a incoming call at all.

I will keep a lookout for the thread you mentioned Tim. I would imagine you all probably already know why we cant call out.

**dvijen** · 07-17-2009 04:40 PM

got it today, will wait for the instructions
thanks
dvijen

**chpalmer** · 07-18-2009 11:50 AM

plugged into the cable modem direct. have internet connectivity through it. line registered last night. no registration this morning...

standard user - password does not work. (admin - admin).

>edit to add Ive gone back to the pap2 for the day...

**Russell** · 07-24-2009 09:18 PM

Originally Posted by Xponder1

Got mine today too.
I also connected it and I can make outgoing calls on both lines but can not get a incoming call at all.

Ditto.

I was going to replace the PAP2T with the newly arrived RT31P2, but not being able to get incoming killed that idea. Xponder1, do you now having incoming? If yes, what did you do to start getting incoming?

**Xponder1** · 07-24-2009 09:27 PM

Originally Posted by Russell

Ditto.

I was going to replace the PAP2T with the newly arrived RT31P2, but not being able to get incoming killed that idea. Xponder1, do you now having incoming? If yes, what did you do to start getting incoming?

I have not reconnected it. I am just going to wait till they ask us to hook them up.